JDcrawlers Messageboard

I dont know why its doing that with photobucket. Basically it had a new undercarriage and pads when it was parked in 05. Just been sitting need to know what to look for.

So Im about to have it blasted, sandblaster wants to remove tracks to blast it correctly. First of all how do you remove the tracks? Second what should i look for or change while its apart. (seals) etc...

????

vestory_guy check your pms

I pm'ed you

They went into the transmission when it was parked, I have a bill for $6400 for changing front trans case, pump, driveshaft, and setting all pressures. But like I said it sat for almost 10 years. I wonder what I need to look for in these trans??

No the last picture isn't mine! But I think my build will be as nice or nicer! And yes from lafayette la 70508.

Still looking for limb risers!!

This is the foresty cab that I am making for it, should have a little better paint job also. Im using carboline carbomastic 15 for primer when they are done blasting it this week. Best paint you can buy. http://i860.photobucket.com/albums/ab162/nastybear03/John%20Deere%20450%20c%20m923%20super%20sin...

I got the motor off of ebay from government liquidation, it is not a re-furb its a re-manufactured which means basically they change all parts out with OEM john deere parts. Motor Is brand new from starter to turbo. Its rated i think right at 100 hp. But way better fuel system and 24v starter and al...

This is the backhoe, it will be going out for Sandblasting also when dozer gets back.

So I found a 77 450c from a childhood friend that has been parked for 10 years. (not inside or with a cover over the muffler). The plan was to see if motor was locked up or not, well long story short the motor was locked up. After dissassembling and sending to a machine shop, found out the block was...

Need limb risers and exhaust riser for a 78 450c

Can reach me at 337-254-1899