Search found 64 matches
- Tue Apr 16, 2019 10:12 am
- Forum: Early model JD crawler technical support
- Topic: 40c steering problem
- Replies: 4
- Views: 5439
40c steering problem
I adjusted my right side steering/breaking. Backing out of the shop everything worked like it was new, however, going forward and pulling back on the right lever, I hear a groan in front of the transmission and the crawler wants to stop. Any ideas what is wrong?
- Fri Apr 05, 2019 4:42 am
- Forum: Early model JD crawler technical support
- Topic: 40c mystery thing
- Replies: 10
- Views: 8365
Re: 40c mystery thing
Thank you, Jim and fundytides.
- Thu Apr 04, 2019 3:29 pm
- Forum: Early model JD crawler technical support
- Topic: 40c mystery thing
- Replies: 10
- Views: 8365
- Thu Apr 04, 2019 11:09 am
- Forum: Early model JD crawler technical support
- Topic: 40c mystery thing
- Replies: 10
- Views: 8365
Re: 40c mystery thing
How do I post a picture of it?
- Thu Apr 04, 2019 9:23 am
- Forum: Early model JD crawler technical support
- Topic: 40c mystery thing
- Replies: 10
- Views: 8365
Re: 40c mystery thing
It's still a 6 volt battery with positive ground.
- Thu Apr 04, 2019 8:42 am
- Forum: Early model JD crawler technical support
- Topic: 40c mystery thing
- Replies: 10
- Views: 8365
40c mystery thing
There is some kind of electrical device on my 40c. It is on the right side of the motor toward the front and mounted below the generator. There are two wires on it and one goes to the coil. What is the name of this thing and what does it do?
- Sat Oct 20, 2018 10:24 am
- Forum: Early model JD crawler technical support
- Topic: 40C right final drive
- Replies: 3
- Views: 3257
Re: 40C right final drive
Yes, I'm sure it's mechanical. Winter is coming soon, so I'll put it in the shop, and tear it down. I had to work on the right final drive axle and put in a new bearing some years ago, so that's not a problem. I have a wood stove and plenty of wood. Any early suggestions about what I should look for...
- Sat Oct 20, 2018 9:19 am
- Forum: Early model JD crawler technical support
- Topic: 40C right final drive
- Replies: 3
- Views: 3257
40C right final drive
I have a 40c, and the right final drive housing had been cracked and welded up when I bought it. My problem is this, I can adjust the right steering lever and it will brake great, but only for about 45 minutes of hard work, then it needs to be adjusted again. What do you think is the problem?
Thanks.
Thanks.
- Mon May 21, 2018 7:14 am
- Forum: Early model JD crawler technical support
- Topic: 6 volt change to 12 volt
- Replies: 19
- Views: 20255
6 volt change to 12 volt
Would like to change from 6 to 12 volt battery with negative ground on my 40C. Any good advice on how to do it?
- Wed Jul 12, 2017 3:06 pm
- Forum: Early model JD crawler technical support
- Topic: Location information
- Replies: 17
- Views: 57520
Re: Location information
Star Prairie WI 54026
- Wed Jul 12, 2017 10:47 am
- Forum: Early model JD crawler technical support
- Topic: 40c choke cable
- Replies: 2
- Views: 3030
Re: 40c choke cable
I sent you an email for price and shipping.
- Wed Jul 12, 2017 8:36 am
- Forum: Early model JD crawler technical support
- Topic: 40c choke cable
- Replies: 2
- Views: 3030
40c choke cable
I need to replace the choke cable for my 40c. Any information on the correct one?
- Sun Apr 20, 2014 8:59 am
- Forum: Early model JD crawler technical support
- Topic: 40c generator
- Replies: 1
- Views: 2486
40c generator
I need to remove my 40c generator. Do I need to remove the grill, or will the bolt slide out with the grill on the crawler? Looks like a tight fit.
- Sun Aug 04, 2013 4:19 pm
- Forum: Early model JD crawler technical support
- Topic: Steering clutch
- Replies: 6
- Views: 5986
- Sun Aug 04, 2013 7:29 am
- Forum: Early model JD crawler technical support
- Topic: Steering clutch
- Replies: 6
- Views: 5986