JDcrawlers Messageboard

Found a pto shaft but on the end that mates to transmission inside gear housing looks like a cotter pin or bolt goes on that end .wondering if it’s as easy as all going in from rear . I’ll have to pull parts book and see what it shows .

Was planning on generator so no loss of HP for power train whatsoever . Thanks guys

Hey guys was wondering on a 420C that has lever already up beside gear selector how much is involved with adding PTO shaft from rear ? Is it just the rear housing swap with hole for shaft and shaft itself or do you have to spit tractor ? Thanks George

I just brought home a 40c and noticed the fenders do not have dimples like my MC's ? These definetly look factory but am wondering why there are no dimples like all my mc's have? did deere change these fenders on the 40c? The parts book I have for 40c does not show dimples for part number am 2383 t ...

Thank-you !!

Does anyone know what the last serial number was with 3 rollers and then the first with 4 rollers? Im trying to figure out how many 3 roller vs 4 vs 5 were made. Thanks

Trying to determine what kind of oil others recommend using in jd 2 cylinder gasoline engines? I have searched the internet for hours on this topic and have read conflicting opinions. I simply want to use the best oil available in my MC's and up to now can't seem to figure out what that should be? t...

the pan for 40's will work on mc's too right? if so how much do you want for one? thanks

Can I post Images? Images can indeed be shown in your posts. However, there is no facility at present for uploading images directly to this board. Therefore you must link to an image stored on a publicly accessible web server, e.g. http://www.some-unknown-place.net/my-picture.gif. You cannot link to...

why can't I insert pictures? Is this a windows 7 issue[/img]

http://s256.photobucket.com/albums/hh19 ... /new%20MC/

Why do you think this MC had a cylinder and no blade ordered from factory? Also what is with the weight attachment up front, I had never seen this until this one?

Yeah that sounds good, will send you photos of anything you need and we can work together.

Hi everyone I was wondering if anyone has a picture or actually has the depth shoe that mounts on the dozer blade for the tool carrier? It adjusts from tractor seat by turning the rod which raises or lowers the shoe depending on how much bite you want the blade to have?I have found a small picture o...

I was wondering what the options are for getting rubber on a mc? I have found a bunch of companies that make bolt on rubber that goes over existing grouser but nothing that will work with the mc style shoe? What is one to do if they want rubber under their mc? Looks like the flat style shoe that wer...