JDcrawlers Messageboard

suggest you go directly to owner of this site...LAVOY..if he aint got it he can sure direct you!!!

ok....so if i have to get salvage parts.....does the jd440 icd use the same hydraulic pump as the ic??? hopefully so or at least crank type on one with plumbing.....

anyone know answer??

ok now....the original post mentions problem solving with "silicone", somewhere someone on this site...mentioned problems involving the silicone sealants and sensitive valves.....especially when squeeze out occurs....could this be the contaminate and being not cured complete actually coat part of th...

could it possibly be critters pack ratting in your clutch housing? i found walnut in closed radiator. they get in where you wouldn't believe possible

yes you can pst pics to this board....but..you must register with Lavoy either send email or pm with your choice of login and password so that he can validate your access.....once you have that done....you will need to log in to jdcrawler site and pull up the board index and at the bottom of the pag...

Lavoy...... Looks like i am going to need to get a rebuild kit for my hydraulic pump.. it is 1960 model jd440 ic with the cam pump in front of block.... Also can i get to this thing without taking rad and front end off??? I rebuilt the one on my wheeled jd40 tractor but don't know how hard this one ...

Well and tis a fine day to have a "Happy Birthday to YOU!" Sorry to hear about your disillusionment.....understatement intended... Now that you have addressed it it will pass and you can relax and let blood pressure back down. Believe you may have educated them well. Bet they started hopping when yo...

Well at least it did not get stuck and buried in mud again, them thar Penna hills can be trouble.

Also note.....the corn head type grease is available at tractor supply....in quart bottles, i have an old 1 inch cartridge grease gun about 6 inches long and just refill the old cartridge out of the bottle tis messy but at least i can use it on my old jd440ic....Lavoy has the button head fitting for...

not heavy equipment but i had similar failure recently.... have my old trusty half inch (slow), think made by western auto, inherited from my dad power drill.....went to use it and out of it comes.....stink bugs and actually locked it up...twas hanging on my garage wall and had garage doors open mos...

Yes...from what i am finding out, the b&w setup is a bit involved but they do NOT require drilling holes in the frame itself, seems all parts are made specifically for each model and they do have my 1/2 ton model in stock, and the bed does not even have to come off.... a bit pricey but overall seems...

Have many of you fellers installed your own gooseneck hitches? Am considering doing so on my 1/2 GMC, talked to the shop and they say they don't have to take the bed off to install, so am wondering just how much of job it is? B & W turnover

comments??

well first thing i see is that all thread.....might want to reconsider as i don't suppose that is grade 5 like was suggested.. the pic server info is located in the question and answer forum at bottom of the board index...and is only visible when you are logged into the jdcrawler site....read entire...

In regards to the leaking hydraulic cylinder, that Amos pointed out...I have a jd440ic one of my cylinders was leaking with a slow drip...it finally just quit working recently and i took it to hydraulic shop...mind you this is original 1960 machine....these cylinders are simply not available because...

dime it all....been snowing all day....none staying on ground tho, but that dang wind is really cold....blows right thru ya.....where dat global warming when ya want it????