Search found 66 matches
- Tue Oct 23, 2012 7:51 am
- Forum: Early model JD crawler technical support
- Topic: John Deere 440 crawler tips of sprockets hitting idler ?
- Replies: 13
- Views: 10894
I'm finding some of the lock tabs are breaking and letting the bolts come out and the axle to slide out. I just repaired one that this happened to thought I would take one off a final I had laying around took the cap off and it had broke to and the bolts where backing out. Used the finger gauge for...
- Sat Oct 20, 2012 6:19 am
- Forum: Early model JD crawler technical support
- Topic: John Deere 440 crawler tips of sprockets hitting idler ?
- Replies: 13
- Views: 10894
While i have the finals off will probably replace brake bands as i'm about out of adjustment. Being relatively new to bulldozing (5)years. I had never operated one before. Only the one I have. Last year i jumped on a JD 350 dry clutch and was surprized when going downhill it turned exactly opposite ...
- Fri Oct 19, 2012 7:05 pm
- Forum: Early model JD crawler technical support
- Topic: John Deere 440 crawler tips of sprockets hitting idler ?
- Replies: 13
- Views: 10894
- Fri Oct 19, 2012 11:44 am
- Forum: Early model JD crawler technical support
- Topic: John Deere 440 crawler tips of sprockets hitting idler ?
- Replies: 13
- Views: 10894
Tracks are off, idlers are good on both sides. I/16" lash on left sprocket very little up down maybe a 32nd? I/4 " lash on right sprocket very little up down maybe a 32nd? upon inspection my tracks were way to tight perhaps a 1/2" sag, when it should have been 7/8 to 1 1/8"... the four bolts that ho...
- Thu Oct 18, 2012 6:54 am
- Forum: Early model JD crawler technical support
- Topic: John Deere 440 crawler tips of sprockets hitting idler ?
- Replies: 13
- Views: 10894
- Wed Oct 17, 2012 7:35 pm
- Forum: Early model JD crawler technical support
- Topic: John Deere 440 crawler tips of sprockets hitting idler ?
- Replies: 13
- Views: 10894
John Deere 440 crawler tips of sprockets hitting idler ?
Can't see anything obviously wrong...
Only way i can see this happening is if the axels got bent (3"solid steel)???
Help!
going to have to grind off sprocket tips on obth sides or it;s going to take my rear idlers out.
Don't understand as there was about 1/8 inch clearance and now theres none
Only way i can see this happening is if the axels got bent (3"solid steel)???
Help!
going to have to grind off sprocket tips on obth sides or it;s going to take my rear idlers out.
Don't understand as there was about 1/8 inch clearance and now theres none