JDcrawlers Messageboard

Thanks for all the help. I took the carb a part after sitting with the bowl full of fuel, and the float had fuel in it.
After installing a new float from Roberts Carb Repair for $30, I am back in business.

I have a Marvel - Schebler TSX carb on my 440ic. It seems that when I let the tractor set for long periods the needle valve quit working and gas floods out of the carb when I open the valve on the sediment bowl. This time I replaced the float needle valve and seat on the gas still pours out of the c...

I am looking for information on blade attachments for a 440ic. I seems that the one I have mat not have a Deere attachment at all, but maybe one made by Holt. Does anyone know where I might find information on non-Deere attachments?
Thanks
Curt

I have a 440 that only stears on one side I removed the side that seemed to be sliping and when I measured the disks they where all within spec. However the steel discks have quite a bit of pitting from corrosion and the composit disks have smooth glossy finish over about half of the surface. They d...

I just pulled the final drives out of my 440. both splines were wet with a small amount of gear oil. Is this normal, or does it indicate leaking seals? I also noticed on this site that seals are available but in a kit with bearings for $200. Is it recomended to replace bearings when replacing seals?...