Search found 55 matches
- Fri Mar 25, 2011 8:25 pm
- Forum: Late model JD crawler technical support
- Topic: Delco one-wire alternator conversion
- Replies: 18
- Views: 28704
- Sun Mar 20, 2011 8:03 pm
- Forum: Late model JD crawler technical support
- Topic: HLR Clutches on a 450c and need parts.
- Replies: 5
- Views: 5606
- Sun Mar 20, 2011 6:23 pm
- Forum: Late model JD crawler technical support
- Topic: HLR Clutches on a 450c and need parts.
- Replies: 5
- Views: 5606
Thanks Jason, just spent the better part of the day and pulled all of it off (by myself I might add). Not a bad job but boy those 4 lift cylinder hoses on the inside of the frame were not fun :x. I am ready to pull in the garage but do you just cap off the hoses to start and move the tractor? Does a...
- Sun Mar 20, 2011 10:36 am
- Forum: Late model JD crawler technical support
- Topic: HLR Clutches on a 450c and need parts.
- Replies: 5
- Views: 5606
HLR Clutches on a 450c and need parts.
Hello Again! I had a great day yesterday and fired up my 450 after not running for a long time. I did crank it over a couple times a year but not start. Changed the fuel and she fired write up and the turbo gave me a whistle only a tech could love!! :D I even got to move it but after she warmed up i...
- Fri Dec 31, 2010 11:16 am
- Forum: Late model JD crawler technical support
- Topic: 450C
- Replies: 7
- Views: 7779
Hey Bob, Not sure what adapter your talking about BUT, if their is any damage done either to the housing that the rotor is in or the rotor its self then that turbo is possibly junk. May want to take it to a turbo shop just to have a look at. In the testing that I do, if you rebuild that turbo and it...
- Wed Dec 29, 2010 8:57 pm
- Forum: Late model JD crawler technical support
- Topic: 450C
- Replies: 7
- Views: 7779
Hello, I hate to hear about the obsolete boom swing. If you find a kit for the conventional double cyl let me know. I do a lot of work with engines and know that you want to be very carefull about tearing down turbo's. The tolerances are very very small and I have seen the wheel touch the cage under...
- Tue Dec 28, 2010 8:09 pm
- Forum: Late model JD crawler technical support
- Topic: 80s 450c steering clutch
- Replies: 5
- Views: 5972
- Tue Dec 28, 2010 7:23 pm
- Forum: Late model JD crawler technical support
- Topic: 80s 450c steering clutch
- Replies: 5
- Views: 5972
- Tue Dec 28, 2010 6:35 pm
- Forum: Late model JD crawler technical support
- Topic: 80s 450c steering clutch
- Replies: 5
- Views: 5972
80s 450c steering clutch
Well I like others am going to atempt putting in a set of clutches :( I noticed that I was loosing push power and when I would try to steer, it would just stop. It got worse the hotter it got and would sometimes drive 1 side when real hot. I got it stuck acouple times in some clay and had smoke come...
- Fri Dec 24, 2010 2:02 pm
- Forum: Late model JD crawler technical support
- Topic: Is this the write place for an 80s 350c questions
- Replies: 1
- Views: 2559
Is this the write place for an 80s 350c questions
Hello and Merry CRISTmas to all! I am going to put new clutches in my 350c loader and have some questions. Is this the write place?