Search found 10812 matches
- Tue Nov 07, 2023 7:49 am
- Forum: Early model JD crawler technical support
- Topic: Cracked housing repair
- Replies: 7
- Views: 12378
Re: Cracked housing repair
They are cast iron, vee it out, braze it and run it. There is no concentrated stress on the hole, it is distributed around the hole by the bearing quill. It is likely a crack from prior in it's life when a bearing went out and played nutcracker with the gears, and cracked the case. Normally it just ...
- Fri Oct 27, 2023 4:24 pm
- Forum: Early model JD crawler technical support
- Topic: Grease in Rockshaft
- Replies: 2
- Views: 5090
Re: Grease in Rockshaft
I can't see it hurting anything, but better make sure it is full, and coming out past the seals or you won't have any grease around the shaft.
Lavoy
Lavoy
- Wed Oct 18, 2023 8:11 am
- Forum: Off-topic discussions
- Topic: Devcon for sprocket/final drive shaft repair
- Replies: 3
- Views: 14901
Re: Devcon for sprocket/final drive shaft repair
I'm assuming you mean between the hub and the axle? If so, I'm also assuming you have a 3 roller crawler?
Lavoy
Lavoy
- Tue Oct 17, 2023 7:29 am
- Forum: Early model JD crawler technical support
- Topic: Need pictures of back of 1010 crawler loader hydraulic quick connector for backhoe
- Replies: 4
- Views: 11907
Re: Need pictures of back of 1010 crawler loader hydraulic quick connector for backhoe
If it is a hoe capable crawler, there will be 2 large lines coming from the diverter near the valve body. If it is not a factory hoe crawler, there will be no lines or diverter.
Lavoy
Lavoy
- Sun Oct 15, 2023 7:59 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Roller Grease
- Replies: 2
- Views: 8390
Re: Roller Grease
Whichever is lighter I would guess. I just always use corn head grease.
lavoy
lavoy
- Sun Oct 08, 2023 5:04 pm
- Forum: Show & Tell
- Topic: 40C Project
- Replies: 12
- Views: 24887
Re: 40C Project
I've been out of the office a lot due to a death in the family, but have 14 hours of road time every week, so just leave a message, and I will call on the way back home.
Lavoy
Lavoy
- Fri Oct 06, 2023 3:53 pm
- Forum: Show & Tell
- Topic: 40C Project
- Replies: 12
- Views: 24887
Re: 40C Project
You may not know it, I am the owner of this site, and I sell parts for these crawlers. You can call 701-361-1006 and I can get you squared away.
Lavoy
Lavoy
- Thu Oct 05, 2023 5:33 pm
- Forum: Late model JD crawler technical support
- Topic: identify my 350 injection pump
- Replies: 8
- Views: 5620
Re: identify my 350 injection pump
Part number should be on the pump.
None of them come with the window, it is only installed for timing, then removed.
Lavoy
None of them come with the window, it is only installed for timing, then removed.
Lavoy
- Thu Oct 05, 2023 8:23 am
- Forum: Show & Tell
- Topic: 40C Project
- Replies: 12
- Views: 24887
Re: 40C Project
Congrats, enjoy it.
Lavoy
Lavoy
- Thu Oct 05, 2023 8:22 am
- Forum: Early model JD crawler technical support
- Topic: John Deere mc with log grapple
- Replies: 1
- Views: 2357
Re: John Deere mc with log grapple
No, jobber or home made.
Lavoy
Lavoy
- Tue Sep 19, 2023 9:29 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: final drive housing
- Replies: 1
- Views: 11665
Re: final drive housing
Should have one on hand.
Lavoy
Lavoy
- Fri Sep 08, 2023 7:30 am
- Forum: Early model JD crawler technical support
- Topic: 420C Rubber Tracks?
- Replies: 12
- Views: 15402
Re: 420C Rubber Tracks?
Can't find it, but it is 74 at the end instead of 72.
Lavoy
Lavoy
- Wed Sep 06, 2023 9:11 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350C Brake bands
- Replies: 2
- Views: 3765
Re: JD 350C Brake bands
Very highly unlikely that someone can reline the wet brake bands, but it's possible. Usually you don't see many rebuilds on the wet clutch crawlers, so if yours are worn, you may have other underlying issues.
Price you are seeing on bands, and the freight seem high to me.
Lavoy
Price you are seeing on bands, and the freight seem high to me.
Lavoy
- Wed Sep 06, 2023 9:09 pm
- Forum: Early model JD crawler technical support
- Topic: JD 420c Crawler Hydraulic System
- Replies: 8
- Views: 9926
Re: JD 420c Crawler Hydraulic System
I would GUESS that your setup would be at 1500PSI which if I am correct would explain the lack of power. Flow is another factor, you may be down on flow and pressure both.
Lavoy
Lavoy
- Wed Sep 06, 2023 9:08 pm
- Forum: Early model JD crawler technical support
- Topic: 420C Rubber Tracks?
- Replies: 12
- Views: 15402
Re: 420C Rubber Tracks?
There is a set that will work on the 440, figure about $4000 for the conversion.
Lavoy
Lavoy