JDcrawlers Messageboard

Thanks KenP - I checked the transfer pump by cracking the bleed at the filter bowl and pumping - noting the spray of fuel and then using the priming lever to see the pump spray out fuel. I did use ether sparingly to start the engine - knowing the associate woes.... It was use ether to get it running...

I did not check the fuel at the injector pump nor injectors tonight. I had limited time this evening after work/before dark and the side cover was on the injector side. I did check to make sure the transfer pump was keeping the filter full - which it was. I plan to check the fuel at the injector pum...

Thanks and Good point JTRichard - It does not seem to be cranking any faster. I'll double check the fuel at the injector lines.

Do you know how to check the compression on the diesel?

My previously hard to start 350B, now will not start at all. I am a bit perplexed by the problem as I drove the unit to it's resting location, only a few days ago. The engine does not seem to be responding to starting fluid being added. At one time today, after adding starting fluid, the engine did ...

Thanks Scottyb

My 1974 - 350B has a dipstick for the direction reverser that does not seem to be the correct dipstick. It does not thread into the hole, but the threads on the dipstick drop right into the hole. However, the knob on top seems to match the diameter of the housing... My main concern is the length of ...

I now have the manuals from JD as noted.

I still need the parts for the 350B if anyone has any used stuff.

Thanks Lavoy, I am interested in used parts if available to hopefully help keep costs down. How do I contact you about pricing and availability of parts?

I need the following parts for a 1975 350B Loader: -- Track Adjuster (Cylinder and Piston) -- Track Adjuster Spring -- Track Adjuster Spring Sheet metal Cover -- Right and Left Sheet Metal Engine compartment covers -- Seat Cushions -- Hydraulic compartment door hinge (Possibly the whole door - mine ...

Thanks for the parts manual! It had exactly the diagram I needed.

It is not looking good for my transmission.

We may decide to try to locate a replacement transmission.

Anyone have a transmission for a 440 ICD??

Thanks,

I have been trying to help my Dad with a JD 440ICD Crawler. The Pinion Gear does not make good contact with the carrier in the Differential and therefore the crawler will not ... crawl. :( Someone has already been working on this crawler and I suspect some parts are wrong and/or missing.... The pini...