Search found 2086 matches
- Sun Mar 20, 2022 9:28 am
- Forum: Late model JD crawler technical support
- Topic: 1979 350C loader
- Replies: 13
- Views: 5051
Re: 1979 350C loader
Not much trouble shooting to that type of fuel gauge, compared to the electric ones. When you look in the fill opening, you should see the open end of a small tube looking up at you. You will want to make sure that tube is open. It is the tank vent, and the other end comes out through the bottom of ...
- Sun Mar 20, 2022 6:03 am
- Forum: Late model JD crawler technical support
- Topic: 1979 350C loader
- Replies: 13
- Views: 5051
Re: 1979 350C loader
Welcome to the Board and congratulations on your purchase. It sounds like a good one. What did you get for a Book and binder? You should have the appropriate Operator's Manual and Technical Manual for the machine serial number. The technical manual should be JD # TM1115. The parts catalog part numbe...
- Fri Mar 18, 2022 8:50 am
- Forum: Late model JD crawler technical support
- Topic: 65 jd crawler
- Replies: 2
- Views: 2065
Re: 65 jd crawler
Welcome to the board.
Several different pumps were used in different models. It would help to know the crawler, 350 or 450, dozer or loader, and pump size. The number you have posted isn't a JD part number for anything I can find.
Jim
Several different pumps were used in different models. It would help to know the crawler, 350 or 450, dozer or loader, and pump size. The number you have posted isn't a JD part number for anything I can find.
Jim
- Sun Mar 13, 2022 6:24 pm
- Forum: Early model JD crawler technical support
- Topic: starter keeps turning
- Replies: 19
- Views: 7436
Re: starter keeps turning
Unfortunately, without the right equipment you can't fully test starter components. It could have weak field coils or a bad armature. You can find online info on testing them that you can do with a voltmeter and ohmmeter. If you do a web search using the Delco part number, you can usually find a few...
- Sun Mar 13, 2022 4:06 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 Radiator
- Replies: 1
- Views: 1807
Re: 1010 Radiator
Looking at the 1010 crawler parts catalog online, it appears they used 5 different radiators between a serial number break, diesel or gas, and reverser or no reverser. Some (re-cored/reconditioned) turn up doing a web search by the part numbers, but I don't know which one you need. And I can't say i...
- Sun Mar 13, 2022 5:10 am
- Forum: Late model JD crawler technical support
- Topic: Bucket Pins
- Replies: 1
- Views: 1790
Re: Bucket Pins
Welcome to the Board. Don't know if you know about this but the 350B crawler tractor used one parts catalog (PC1169) and the loader attachment had its own parts catalog PC1209. The dozer blades use a third catalog. They didn't put all in one until the 350C. Below are links to the online catalogs for...
- Thu Mar 10, 2022 5:51 pm
- Forum: John Deere crawler FAQ's
- Topic: JD450 thru JD450G Serial Numbers
- Replies: 28
- Views: 160035
Re: JD450 thru JD450G Serial Numbers
Riddle me this. What is a:. Type E7450,. Serial No. 0089xxT. It does not follow the format in the decoder. It has JD450 stenciled on the side. The tag is on the right side of the instrument panel attached with rivets and looks original. For reference of those who may read this in the future. E7450 ...
- Thu Mar 10, 2022 5:41 pm
- Forum: John Deere crawler FAQ's
- Topic: JD450 thru JD450G Serial Numbers
- Replies: 28
- Views: 160035
Re: JD450 thru JD450G Serial Numbers
What I see in the online parts catalog is the spin on filter is on the outside of the tank, not inside the tank. The parts catalog it started with crawler serial number 354075 and was used on the crawlers after that serial number. Two different filters were used in the tank prior to that serial numb...
- Mon Mar 07, 2022 8:59 am
- Forum: Late model JD crawler technical support
- Topic: John Deere track wear gauge
- Replies: 9
- Views: 8363
Re: John Deere track wear gauge
The only one that really needs to be a gauge is the sprocket cup profile. One could copy the profile of a new sprocket cup and cut one out to match thatand it would give an idea of wear.
- Sun Feb 27, 2022 6:28 pm
- Forum: Late model JD crawler technical support
- Topic: 350B Water Pump
- Replies: 4
- Views: 2792
Re: 350B Water Pump
You are in Canada and I don't know what shipping costs and such amount to but checking with Lavoy is one good possibility. If he can't help you, I would go right to John Deere. It looks like your 350B water pump takes the same rotating parts as my wheel tractors use (the rotating wear parts are comm...
- Thu Feb 24, 2022 6:19 pm
- Forum: Late model JD crawler technical support
- Topic: jd 350c hydraulic leak
- Replies: 1
- Views: 1594
Re: jd 350c hydraulic leak
Welcome to the Boards. A bit of housekeeping. A post with a question like this one you have on your 350C should be on the Late Models Board. Lavoy or a moderator will likely move it when they see it. Looking at the online parts manual the pressure side (going from the pump to the control valve) is s...
- Thu Feb 24, 2022 5:51 pm
- Forum: Early model JD crawler technical support
- Topic: 1959 John Deere 440ICD help
- Replies: 1
- Views: 1964
Re: 1959 John Deere 440ICD help
Here is a link to the online 440ICD parts catalog on jdparts.com so you can look up part numbers you want. https://partscatalog.deere.com/jdrc/navigation/equipment/82313/level/2/snp/NDc2NTU6Q0hBUFRFUlsxMDYxOiNCVVNJTkVTU19SRUdJT04sNDkyMDojQ0FUQUxPRyw4MjMxMzpFUVVJUE1FTlRd You will likely find a number...
- Wed Feb 23, 2022 5:53 am
- Forum: Late model JD crawler technical support
- Topic: John Deere track wear gauge
- Replies: 9
- Views: 8363
Re: John Deere track wear gauge
I believe the JD266 was for the 350s. The JD267 covered the 40, 420, 430, 440IC, 440ICD, 1010, and 2010. The JD268A was for the 450s. All are discontinued, according to the 1986-1987 JD service tools catalog. The gauges are now in undercarriage inspection kits (JT05518 and JT05523) according to that...
- Tue Feb 22, 2022 6:40 pm
- Forum: Early model JD crawler technical support
- Topic: 40c idler wheels
- Replies: 7
- Views: 4478
Re: 40c idler wheels
Pictures have to be posted using a third-party hosting site. The site has a dedicated picture server you can read about on the Messageboard Q&A and Announcements Board you will see at the bottom of the list on the Board index page. Imgur and Postimage are a couple other third-party sites. If there a...
- Sun Feb 20, 2022 12:59 pm
- Forum: Early model JD crawler technical support
- Topic: oh boy
- Replies: 3
- Views: 2670
Re: oh boy
This link opens your gallery to show the three pictures you uploaded there. Progress, keep trying on the individual pictures and you will get there. Here is a link to the 1100 parts catalog online at jdparts.com. (I have not found a listing or manual of the attachments for it.) https://partscatalog....