Search found 43 matches
- Sun Aug 02, 2009 4:52 pm
- Forum: Early model JD crawler technical support
- Topic: Interesting problem with 440 ICD
- Replies: 8
- Views: 8443
Guido, if you can pull it without any problems then the lower shafts most likely aren't the problem or is the engine turning when you pull it?. If the engine isn't turning then it must be in the input or pto. Can you turn the top shaft with a bar with out turning the engine? If you can pull it witho...
- Wed Apr 01, 2009 5:01 pm
- Forum: Early model JD crawler technical support
- Topic: New 440IC Reverser Shaft
- Replies: 9
- Views: 8369
Buddy, yes it is expensive to repair a reverser but let me inject one thing here. I would say it depends what kind of work you plan to do with the crawler. I have a 440 with and a 40 without and I sure hate bulldozing with the 40. The big thing is if you do any long pushes it takes for ever to back ...
- Sat Feb 21, 2009 2:09 pm
- Forum: Early model JD crawler technical support
- Topic: Final drive?
- Replies: 10
- Views: 8081
puttputt, I'll try to answer your second question first. It could be a couple of things. If just the pressure plate is moving it isn't attached tightly to the clutch assembly. If the whole assembly is moving then the bearings are most likely bad. There also are other possibilities like a busted shaf...
- Wed Jan 28, 2009 6:30 pm
- Forum: Early model JD crawler technical support
- Topic: 440ICD with #95 Hoe
- Replies: 5
- Views: 5145
RedDirt, I can't help you much, but I'll try a little. As to the seeking"as you put it, mine does the same thing and I don't think it is any thing to worry about. Also for the most part you will be operating at full throttle so it shouldn't be a problem. As far as the back hoe goes I can't help as t...
- Wed Jan 14, 2009 5:21 pm
- Forum: Early model JD crawler technical support
- Topic: MC wont move
- Replies: 17
- Views: 13563
Dennis you said that the brake was frozen if thats the case that could be the biggest part of the problem. I haven't worked on an MC for over 35 years but I think its the same as my 40, in which case the brake and clutch pedals are on the same shaft. If the brake is froze then it may not be letting ...
- Sat Nov 22, 2008 1:23 pm
- Forum: Early model JD crawler technical support
- Topic: starting 2010 deisel
- Replies: 22
- Views: 19221
- Mon Nov 17, 2008 6:23 pm
- Forum: Early model JD crawler technical support
- Topic: Reversers on jd crawlers
- Replies: 4
- Views: 5794
I don't know how scarce parts are but I did luck out when I needed some for my 440, I got the last of the linings and some other parts that the used parts guy had. At least one part was not real good but better then mine, and none of them were cheap. This was about 4 years ago. As far as using the r...
- Thu Nov 13, 2008 6:51 pm
- Forum: Early model JD crawler technical support
- Topic: jd440 water mixing with oil
- Replies: 4
- Views: 4511
Just came across this post as I haven't been on the board for several months. My guess if you have water in the oil and water out the exhaust the crack between the valve guides would be a good possibility. Another place there could be a leak is around an injector if its a diesel. This I'm not sure a...
- Tue May 06, 2008 5:09 pm
- Forum: Early model JD crawler technical support
- Topic: input shaft
- Replies: 0
- Views: 1657
input shaft
I'm looking for a input shaft for a 440 5spd, And I think a 4spd is the same. Can any one help me out, Lavoy is out. Mark:
- Sat Apr 12, 2008 5:17 pm
- Forum: Early model JD crawler technical support
- Topic: 440 ICD fuel lines
- Replies: 7
- Views: 6335
- Fri Apr 11, 2008 5:33 pm
- Forum: Early model JD crawler technical support
- Topic: 440 ICD fuel lines
- Replies: 7
- Views: 6335
- Thu Apr 10, 2008 4:30 pm
- Forum: Early model JD crawler technical support
- Topic: 440 ICD fuel lines
- Replies: 7
- Views: 6335
440 ICD fuel lines
When I took the hood off I noticed there are 2 lines that come out of the top of the fuel tank. One goes down the right side to the right side of the head. The other goes from the top center to the right side then across the front and is broken off there. I see no other sign of were it went. Is it n...
- Tue Apr 01, 2008 1:22 pm
- Forum: Early model JD crawler technical support
- Topic: Poll for what kind of crawler you have.
- Replies: 220
- Views: 197836