Search found 758 matches
- Sun Feb 09, 2020 9:12 pm
- Forum: Late model JD crawler technical support
- Topic: A “Thank you” for Lavoy and Inj pump question
- Replies: 6
- Views: 4689
Re: A “Thank you” for Lavoy and Inj pump question
If you have nothing better to do, you might try swapping a couple of injectors including NO 2 to see if the noise stays the same or moves with the injector. Just a thought.
- Sun Jan 26, 2020 7:44 pm
- Forum: Early model JD crawler technical support
- Topic: Blown fuze
- Replies: 9
- Views: 6256
Re: Blown fuze
Use a test bulb in place of the fuse. If it is bright you still have the short somewhere. Cheaper than blowing fuses to test. When it gets sorta dim and the other lights light dimly also you are probably working and will not blow the fuse.
- Wed Jan 08, 2020 12:04 am
- Forum: Off-topic discussions
- Topic: Cutting Edge
- Replies: 22
- Views: 17419
Re: Cutting Edge
I guess I was the one that started this thread, I always liked reading anything you posted, I guess because you worked at a place I would like to visit. Bath Iron Works, I spent 33 months on Bath's second Gearing class Destroyer that they finished in '44. DDR-743. I was on it 60-63. It was also the ...
- Fri Jan 03, 2020 11:12 pm
- Forum: Off-topic discussions
- Topic: Cutting Edge
- Replies: 22
- Views: 17419
Cutting Edge
I was reading Stans Dipstick Diaries and noticed a couple of entries from Cutting Edge. Has anybody heard from him in the last year or so?? He reported that he had been diagnosed with Cancer I think a while back but then he disappeared.
Bryce
Bryce
- Tue Dec 24, 2019 7:24 pm
- Forum: Off-topic discussions
- Topic: Merry Christmas
- Replies: 6
- Views: 6111
Re: Merry Christmas
Merry Christmas and Happy New Year to ALL.
- Fri Dec 13, 2019 12:07 am
- Forum: Early model JD crawler technical support
- Topic: 420-C S/N#100676
- Replies: 12
- Views: 8265
Re: 420-C S/N#100676
Sixty some years ago I ran an 8 volt battery in an old Dodge I was trying to drive. Back then I found a generator shop that was able to adjust my voltage regulator so that I could keep the battery charged, It was rough on headlites as only the bulbs marked 6-8v would last more than a few minutes. I ...
- Thu Nov 21, 2019 12:06 am
- Forum: Off-topic discussions
- Topic: Cutting Edge
- Replies: 3
- Views: 4394
Re: Cutting Edge
I believe he was diagnosed with Cancer and have not heard from him in a while.
Bryce
Bryce
- Wed Nov 13, 2019 12:37 am
- Forum: Early model JD crawler technical support
- Topic: 440ic brake/clutch pedal
- Replies: 3
- Views: 2850
Re: 440ic brake/clutch pedal
The brake and clutch operate on concentric shafts, if proper maintenance has been preformed they operate separate from each other. They will rust together and then not work properly. A 440I has a zerk fitting on the left side to insert grease between them. I have heard of people trying to force some...
- Fri Sep 20, 2019 7:38 pm
- Forum: Late model JD crawler technical support
- Topic: 450e
- Replies: 3
- Views: 2792
Re: 450e
Exhaust or Intake Manifold??
- Sat Aug 17, 2019 6:21 pm
- Forum: Late model JD crawler technical support
- Topic: 450b Undercarriage rebuild and steer clutches
- Replies: 63
- Views: 47160
Re: 450b Undercarriage rebuild and steer clutches
Will, I think you will find that Lavoy is located near Horace, North Dakota. And Horace is just south of Fargo, North Dakota.
- Sun Jul 28, 2019 7:27 pm
- Forum: Off-topic discussions
- Topic: Mel Gibson on 450 dozer
- Replies: 2
- Views: 3318
Re: Mel Gibson on 450 dozer
If you click down at the bottom on "Show More" it says it was from "The River" released in 1984. I guess I have never watched it.
- Thu Jul 25, 2019 5:56 pm
- Forum: Late model JD crawler technical support
- Topic: John Deere 450b parts.
- Replies: 1
- Views: 1870
Re: John Deere 450b parts.
Have you tried Lavoy Wilcox , postmaster@jdcrawlers.com? He makes this site possible by selling good parts cheap (as he can).
You might want to edit your profile to give some indication of what part of the world you are in.
You might want to edit your profile to give some indication of what part of the world you are in.
- Thu Jul 11, 2019 12:42 am
- Forum: Late model JD crawler technical support
- Topic: trying to figure out what year and model and steering trouble
- Replies: 12
- Views: 12504
Re: trying to figure out what year and model and steering trouble
S.N 105101 shows to be a 1970 350 Straight. FYI forum has listings.
- Wed Jul 03, 2019 2:03 pm
- Forum: Early model JD crawler technical support
- Topic: Just bought a MC. Oh dear.
- Replies: 7
- Views: 6037
Re: Just bought a MC. Oh dear.
You have some beautiful country up there. I made it to Road America for a Can-Am race over 40 years ago. Cannot help with the MC, need to consider clearing out some 440ICDs
Bryce
Bryce
- Fri Jun 28, 2019 6:17 pm
- Forum: Late model JD crawler technical support
- Topic: 450 Fluids, engine manufacturer and paint
- Replies: 5
- Views: 4090
Re: 450 Fluids, engine manufacturer and paint
AFAIK,except for the 2-53 Jimmy (Detroit) diesels in the 440I, 440ICD, and 435 all John Deere engines are John Deere built. Some newer compact tractors may have Yanmar diesels.