Search found 149 matches
- Mon May 03, 2021 6:25 am
- Forum: Early model JD crawler technical support
- Topic: crawler forks??
- Replies: 14
- Views: 9245
Re: crawler forks??
Its too bad I am 7 hrs away and he said if he cant sell them in the next 4 weeks they will be going to the dumpster... hope someone can get them I dont have time to drive that far.....
- Sat May 01, 2021 5:58 pm
- Forum: Early model JD crawler technical support
- Topic: crawler forks??
- Replies: 14
- Views: 9245
Re: crawler forks??
Thanks that is exactly what I need and very reasonable even if they are not pretty! I just sent the guy a message!
- Thu Apr 01, 2021 1:38 pm
- Forum: Early model JD crawler technical support
- Topic: crawler forks??
- Replies: 14
- Views: 9245
Re: crawler forks??
ok Thanks I kinda wondered about that!
- Wed Mar 31, 2021 5:58 pm
- Forum: Early model JD crawler technical support
- Topic: crawler forks??
- Replies: 14
- Views: 9245
Re: crawler forks??
Very nice thanks! I should do what he did and put a quick tach plate on my crawler but then I would need to convert my bucket too.
- Wed Mar 31, 2021 9:53 am
- Forum: Early model JD crawler technical support
- Topic: crawler forks??
- Replies: 14
- Views: 9245
crawler forks??
Does any one know where to get or what forks will fit on a john deere 90 loader (420c)? Thanks
- Mon Mar 15, 2021 6:45 am
- Forum: Early model JD crawler technical support
- Topic: 420c Alternator issues
- Replies: 5
- Views: 4105
Re: 420c Alternator issues
It turns out all my issue was bad connections....
- Sat Mar 13, 2021 4:25 pm
- Forum: Early model JD crawler technical support
- Topic: Light at the tunnel’s end.
- Replies: 5
- Views: 5392
Re: Light at the tunnel’s end.
Same here got mine out(after rebuild) And collected a total of 1300 gals of sap! It works beautiful other than a few minor issues!
- Sat Mar 06, 2021 6:51 am
- Forum: Early model JD crawler technical support
- Topic: 420c Alternator issues
- Replies: 5
- Views: 4105
Re: 420c Alternator issues
Jim, It has an old anmeter that shows a negative with the lights on but no postive when it is running. I have the wire running from alternator to ammeter and then from ammeter to battery. Yes all 12v negative ground. Is there is a reason it is fluctuating real fast? The volts I mean?
- Fri Mar 05, 2021 9:26 pm
- Forum: Early model JD crawler technical support
- Topic: 420c Alternator issues
- Replies: 5
- Views: 4105
420c Alternator issues
Hi so I just replaced my generator with an alternator ( it was converted to 12 v before i got it and they just disconnected the junk generator :evil: )And I put a gm 1 wire alternator on and It seems the volts fluctuate from 17 to 14 volts the higher the crawler rpms the less it fluctuates... Also i...
- Thu Feb 25, 2021 9:33 am
- Forum: Early model JD crawler technical support
- Topic: John Deere 420c steering clutch adjustment
- Replies: 59
- Views: 31250
Re: John Deere 420c steering clutch adjustment
Ok Yes the long side is toward the transmission and i will try to watch that when I take it apart.
- Thu Feb 25, 2021 9:10 am
- Forum: Early model JD crawler technical support
- Topic: John Deere 420c steering clutch adjustment
- Replies: 59
- Views: 31250
Re: John Deere 420c steering clutch adjustment
Should i replace the disc too? It is glazed some but not to bad.
- Thu Feb 25, 2021 8:57 am
- Forum: Early model JD crawler technical support
- Topic: John Deere 420c steering clutch adjustment
- Replies: 59
- Views: 31250
Re: John Deere 420c steering clutch adjustment
Ok thanks for clearing that up, so i am probably looking at a new pressure plate and disc, though this one looks good not a resurface job. All I can say is it must be defective!! thanks for that helpful info!
- Thu Feb 25, 2021 8:51 am
- Forum: Early model JD crawler technical support
- Topic: John Deere 420c steering clutch adjustment
- Replies: 59
- Views: 31250
Re: John Deere 420c steering clutch adjustment
Lavoy I didn't put new pressure plate and disc in but it was done right before I got it. I adjusted the pressure plate while it was apart. but I really am wondering about my fly wheel needing resurfaced.. It looks like pepboys does it for 35 dollars! I wont be out much!
- Thu Feb 25, 2021 8:37 am
- Forum: Early model JD crawler technical support
- Topic: John Deere 420c steering clutch adjustment
- Replies: 59
- Views: 31250
Re: John Deere 420c steering clutch adjustment
Ok I will double check the free travel but 99.9% sure its right. Do any of you know what it costs to have my flywheel turned? As far as the disc is concerned I am probably going to leave it on for the time being, thanks Jim for that valuble info!
- Wed Feb 24, 2021 6:37 pm
- Forum: Early model JD crawler technical support
- Topic: John Deere 420c steering clutch adjustment
- Replies: 59
- Views: 31250
Re: John Deere 420c steering clutch adjustment
So I was wondering if there is any more Ideas on what could be wrong? My clutch disc and pressure plate is identical to the ones steiner tractor sells for the 420c. maybe take alook at their site and tell me if i have the wrong pressure plate and disc? Honestly I feel like I dont have very many opti...