JDcrawlers Messageboard

Got it running last night! I need to do some carb work but I couldn't stand not hearing it run. The friction system in the throttle lever is pooched so it defaults to wide open and you have to hold the throttle back but it sounds great, good compression, good oil pressure. The reverser works and all...

I was digging through my stuff and found 1010 operator's and partlist for early 1010C (ie. dash shift, ser. no. < 21,900) The covers are not perfect but the insides are good. $50 to a fellow crawler fanatic.

Brent

Rock, if you can get your hands on the service manual, it will be a great investment. The whole final comes off as a unit with the axle in. You must turn the final so the axle clears the trackframe and watch the brake band (it stays) doesn't bind on the brake drum (it comes with the final). And be c...

I have a nice 1010 tach and good cable.

Brent

Picked up new oxygen tank, starting to look like it should now!

Second picture shows the new manifold.

For me, these little crawlers have both collector and working value. These things live and thrive where $90,000 skid-steers and MFWD tractors with loaders fear to go. Then you load them up and take them home with a 3/4 ton truck, wash them off and still have a unit to admire. Consider this. The amou...

Nice unit, you must have got lots of hours on in this winter with all the snow there, eh?

Brent

The loader is a "shop-bilt model 9000." I ran out of oxygen, which is why it is still on there. Here is the canopy that was on it, to go with the winch I think, and another shot from the side, with the nose of my 630 poking out, jealous. Also, the second picture shows the valve, which is a Gresen th...

Here is my latest project. I have had it since last fall, but just got to working on it. More to come.

brent

Does anyone have a set of 440 fenders they want to part with?

Thanks

Brent

Tiny, I see the tilt, but I can't see how it would angle unless the corners of the a-frame or c-frame would pivot and they look to be fixed.

brent

Here is a blade I seen on eBay. It is confusing, there is no angle, but it looks like it tilts. Anyone know about this?
Thanks

JOHN DEERE 1010 CRAWLER 1964 JOHN DEERE BULLDOZER Item number: 7600185417



Brent

I don't know value of blades but I have been kinda looking for one. It is good to find someone close needing parts for the rest of the machine, or consider keeping it yourself for parts, lots of things wil interchange. It is always good to have a few wrecks in the yard I say.

Brent

I don't know value of blades but I have been kinda looking for one. It is good to find someone close needing parts for the rest of the machine, or consider keeping it yourself for parts, lots of things wil interchange. It is always good to have a few wrecks in the yard I say. Brent :D Sorry everyone...

smott, not sure if the 6-way will fit, but I am quite sure that your "2-way" from your 440 will fit on my trailer if you want to sell it.
brent