Search found 273 matches
- Mon Aug 20, 2012 5:25 pm
- Forum: Show & Tell
- Topic: Bull2
- Replies: 48
- Views: 55139
Thanks for the good comments Paul. Yes, The operator makes a huge difference when it comes to wear and break down. I plan to use the crawler in the woods to make some small trails and hauling trees out. I don't want to tear it down again for a while!! So I'll use it with care. This website is great....
- Wed Aug 15, 2012 10:54 pm
- Forum: Show & Tell
- Topic: Bull2
- Replies: 48
- Views: 55139
Thanks Ben, I'm gonna use my small crane shown in the pictures. It is precise and good for 2 tons. I dismantled both 440 with it. I think the back end weighs about 1200 lbs. The causes of all these damages... I think people who bought these kind of tractors back in 1958 had to push them to the limit...
- Tue Aug 14, 2012 8:30 pm
- Forum: Show & Tell
- Topic: Alive after 25+ Years
- Replies: 22
- Views: 23315
- Tue Aug 14, 2012 8:24 pm
- Forum: Show & Tell
- Topic: Bull2
- Replies: 48
- Views: 55139
It's been a while I logged on here. I took a break of computer during my vacations :) but I kept wrenching to try to get bull 2 running again. Thanks Ben and Lavoy for your comments. The problems in the drivetrain were serious enough for me to think about turning this one into a parts crawler: Broke...
- Wed Jul 18, 2012 7:26 pm
- Forum: Show & Tell
- Topic: Rebuilt JD 440 ICD pushing dirt again
- Replies: 11
- Views: 12879
- Fri Jul 13, 2012 3:11 pm
- Forum: Show & Tell
- Topic: 440ICD Paint and Assembly
- Replies: 37
- Views: 34855
- Sat Jul 07, 2012 11:05 pm
- Forum: Show & Tell
- Topic: Bull2
- Replies: 48
- Views: 55139
pissed off
OK. Now this one makes me cranky a bit... I went to work on my bull 2, motivated... I noticed a shade of green on the lower part of the transmission case. My curiosity is on... I look at the number on the case: M3552T. This case # is not in the 440 parts manual. I look on Bull 1 transmission case: M...
- Thu Jul 05, 2012 10:29 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: top rollers
- Replies: 4
- Views: 4832
- Tue Jul 03, 2012 2:27 pm
- Forum: Show & Tell
- Topic: 440ICD Paint and Assembly
- Replies: 37
- Views: 34855
I guess Delo 100 is not very common on this side of the border. The low ash property is very important for shure. I tested so many 2 strokes Detroit genset at 100% load, I know the oil gets hotter in them. Up to 220F. Cooling system and oil cooler have to work perfect on full load. Anyway I don't wo...
- Mon Jul 02, 2012 7:07 pm
- Forum: Show & Tell
- Topic: 440ICD Paint and Assembly
- Replies: 37
- Views: 34855
- Mon Jul 02, 2012 7:02 pm
- Forum: Show & Tell
- Topic: 440ICD Paint and Assembly
- Replies: 37
- Views: 34855
Mine doesn't have a reverser unfortunately. I think it should just have a plate on the reverser case instead of the cover that it does have, but that's what was on there when I dug it out. Did you make some progress on bull2? You find anything out about that 440 you saw on the side of the road a wh...
- Mon Jul 02, 2012 6:32 pm
- Forum: Early model JD crawler technical support
- Topic: 420C Right Track no PULL
- Replies: 32
- Views: 28761
Did you check in the middle of the differential Hub where the Internal splines match witch those of the drive shaft? It might be stripped. Mine ended like that. You can shorten the drive shafts to use the healthy splines on the extremities. Good hubs are hard to find, believe me! Mine is stripped in...
- Sun Jul 01, 2012 7:17 pm
- Forum: Early model JD crawler technical support
- Topic: Pins and bushings
- Replies: 10
- Views: 13440
Hi, Here is the tool they use where I work to do track jobs on the field. I work for a CAT Dealer and the tool box will always go out with a field service technician... For Safety and to avoid misuse of tooling. I think it is not the kind of tool you can rent... It is good to remove a master pin to ...
- Sat Jun 30, 2012 8:48 am
- Forum: Show & Tell
- Topic: 440ICD Paint and Assembly
- Replies: 37
- Views: 34855
- Wed Jun 27, 2012 7:26 pm
- Forum: Show & Tell
- Topic: 440ICD Paint and Assembly
- Replies: 37
- Views: 34855