Search found 563 matches
- Tue Nov 29, 2011 1:51 pm
- Forum: Late model JD crawler technical support
- Topic: three bolts enough to hold rear crossbar?
- Replies: 4
- Views: 5527
I will look at that possability first chance. It does not have any leaks that I saw and their seemed to be faint lines on the crossbar where the caps were attached in the past. I moved it back to the lines and it seems to be good on both sides. Good Idea to check thoose bearings. I haven't changed t...
- Tue Nov 29, 2011 10:38 am
- Forum: Late model JD crawler technical support
- Topic: three bolts enough to hold rear crossbar?
- Replies: 4
- Views: 5527
three bolts enough to hold rear crossbar?
my 350b drivers side sprocket was hitting the back roller when i bought the crawler. My new tech manual explains that shims in or out will solve the alignment problem however my cross-member is welded to the track frames so I loosened the caps holding the rear crossbar and with a jack all and chain ...
- Tue Nov 22, 2011 9:48 am
- Forum: Late model JD crawler technical support
- Topic: ANOTHER NEW CRAWLER OWNER GLAD TO HAVE THIS MESSAGEBOARD
- Replies: 9
- Views: 7742
Jason thanks for the invite. I am a retailer so before xmas is not very likely but still possible to make the trip. I measured my track chains yesterday using info I found on the messageboard and not to my surprise I am on my last 20% or less. Enough I think to get me by this winter but will be addi...
- Mon Nov 21, 2011 1:44 pm
- Forum: Late model JD crawler technical support
- Topic: ANOTHER NEW CRAWLER OWNER GLAD TO HAVE THIS MESSAGEBOARD
- Replies: 9
- Views: 7742
Jason that winch arch combo sounds interesting. what does it take to put it on and off when needing the hoe? Not something I would do every day, more like the winch combo in the winter and the hoe in the summer. send me info or a link if you would on them. $? I do not have the pto shaft from the bac...
- Mon Nov 21, 2011 11:40 am
- Forum: Late model JD crawler technical support
- Topic: ANOTHER NEW CRAWLER OWNER GLAD TO HAVE THIS MESSAGEBOARD
- Replies: 9
- Views: 7742
http://farm7.staticflickr.com/6113/6377627821_da2fc8cf07_z.jpg this is the hoe that came with my 350b. it was easy to remove using the hydraulics as it has a well built bracket on the crawler. It is a case d130 hoe attachment and I removed it to get it home and haven't put it back on yet. I might t...
- Mon Nov 21, 2011 9:18 am
- Forum: Off-topic discussions
- Topic: Tree rats
- Replies: 12
- Views: 10774
- Mon Nov 21, 2011 9:05 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: NEED BUCKET TEETH FOR 350B
- Replies: 3
- Views: 4542
NEED BUCKET TEETH FOR 350B
HAVE THE 8 SETS OF HOLES DRILLED IN THE BUCKET THAT LOOK ORIGINAL. LOOKING FOR USED OR REASONABLY PRICED TEETH. I NEED THEM SHIPPED TO CANADA IF IT IS POSSIBLE. PREFER BOLT ON BUT WHAT DO YOU HAVE? SCOTTYB
- Mon Nov 21, 2011 12:50 am
- Forum: Late model JD crawler technical support
- Topic: ANOTHER NEW CRAWLER OWNER GLAD TO HAVE THIS MESSAGEBOARD
- Replies: 9
- Views: 7742
ANOTHER NEW CRAWLER OWNER GLAD TO HAVE THIS MESSAGEBOARD
i'M SCOTT IN SASKATOON SASKATCHEWAN CANADA AND THE RECENT PROUD OWNER OF A 350B CRAWLER LOADER. I HAVE BEEN READING OVER THE POSTS FROM THE LAST COUPLE OF YEARS AND WHAT A GOOD START THIS HAS BEEN. MY DEERE CAME WITH A CASE BACKHOE THAT SOMEONE DID A NICE JOB OF FABRICATING A BRACKET TO FIT IT ON TH...