Search found 120 matches
- Wed May 14, 2008 5:21 pm
- Forum: Early model JD crawler technical support
- Topic: input shaft
- Replies: 7
- Views: 6214
input shaft
lavoy can you e mail the price of the shaft to me? also the man that owns the dozer is wondering if he could cut two couplers to make make one,he says his is fine and if he could get a course one he would cut it and weld it back together, he says this coupler is between the trans and clutch drivesha...
- Mon May 12, 2008 8:06 pm
- Forum: Early model JD crawler technical support
- Topic: input shaft
- Replies: 7
- Views: 6214
input shaft
it is a four speed trans,
- Mon May 12, 2008 7:24 am
- Forum: Early model JD crawler technical support
- Topic: input shaft
- Replies: 7
- Views: 6214
input shaft
lavoy do you have a input shaft for a 1957 420? serail# 111376 fine spline.. trans is broke ,got spare trans,but spline was coures would,nt fit thank you
- Tue May 06, 2008 8:05 pm
- Forum: Early model JD crawler technical support
- Topic: JD2010 stoped running after fuel hose replacement
- Replies: 11
- Views: 15717
bleeders
ran my brothers cat d3 out of fuel, tryed to start it for about four hours i tryed everything to get it to run no luck, gave in went and got friend who owned a garage, dozer was running in ten minutes he bleed the line that was the longest to the shortest, fired right up! i thought i knew alot until...
- Sun May 04, 2008 8:20 pm
- Forum: Early model JD crawler technical support
- Topic: tough nuts
- Replies: 8
- Views: 7013
rusted bad
the bolts on my track frame are rusted bad, no doubt that they will break off easily if turned , should i break them all off ,then try to get out, or just leave them alone and hope they dont break while playing around with it?
- Mon Apr 28, 2008 2:50 pm
- Forum: Off-topic discussions
- Topic: scrap steel
- Replies: 4
- Views: 6372
scrap steel
im not sure if steel is going out of sight where you live but here in maine people are scraping anything made of metal,this includes many bulldozers,i seen 4 dozers in one yard to be cut up! one was a cat d7 that was running and offloaded driven to scrap pile and shut down. my friend got 800$ for hi...
- Wed Apr 23, 2008 8:09 pm
- Forum: Early model JD crawler technical support
- Topic: skid plates
- Replies: 8
- Views: 7078
skid plates
i looked at taking it off ,it went from front to drawbar, this thing was thick had some dents, looked like more than i wanted to tackle, sold spare dozer to friend at work,hope i dont need it,hope he can use it,,,thanks. Eric
- Wed Apr 23, 2008 2:24 pm
- Forum: Early model JD crawler technical support
- Topic: steering clutches
- Replies: 4
- Views: 4561
thanks
getting ready to pull it apart, i will check bearings also, Lavoy i will get a list ready i would like to get tach cable and maybe one spocket if still any left , i will pull and see what i find thanks Eric
- Mon Apr 21, 2008 9:15 pm
- Forum: Early model JD crawler technical support
- Topic: steering clutches
- Replies: 4
- Views: 4561
steering clutches
im getting ready to take my 58/420 dozer apart it will not turn left or right can someone please give me a rough guess on a complete clutch set for both sides. i would like to put all new in it since it will be apart.. thank you Eric...
- Sat Apr 19, 2008 7:47 pm
- Forum: Early model JD crawler technical support
- Topic: skid plates
- Replies: 8
- Views: 7078
- Sat Apr 19, 2008 12:29 pm
- Forum: Early model JD crawler technical support
- Topic: skid plates
- Replies: 8
- Views: 7078
skid plates
the dozer i want to keep has a small skid plate that covers just the engine it is a 58 ,420,,,i have a 57 dozer with a full skid plate from front to rear, i cant see how to take it off, it has brackets that hook to the cross shafts , it looks like the dozer frame is in the way, if im just playing ou...
- Wed Apr 16, 2008 7:36 pm
- Forum: Early model JD crawler technical support
- Topic: digging myself a hole
- Replies: 4
- Views: 4554
digging myself a hole
greetings. i have bought a phase 3 420 dozer 133148, from first owner. it stopped turning it will only go back and forth,the motor was just rebuilt,it has never been apart otherwise and only had one new spocket added since new,cost 2000$,with a nice two piston lift manual.angle blade/ now i found an...
- Sat Apr 05, 2008 8:01 pm
- Forum: Early model JD crawler technical support
- Topic: four roll vs five roll
- Replies: 3
- Views: 3979
four roll vs five roll
just bought a late 1958 420,it has four rolls.why do some have five? and any pros or cons to either one?
- Thu Mar 27, 2008 6:34 pm
- Forum: Early model JD crawler technical support
- Topic: Poll for what kind of crawler you have.
- Replies: 220
- Views: 196753
crawler model
.sorry hit button twice..
- Thu Mar 27, 2008 6:32 pm
- Forum: Early model JD crawler technical support
- Topic: Poll for what kind of crawler you have.
- Replies: 220
- Views: 196753
crawler model
i just bought a 420 serial #133148 havent got it home yet to much snow.