Search found 620 matches
- Fri Jul 29, 2016 11:07 am
- Forum: Early model JD crawler technical support
- Topic: Another 52 mc question
- Replies: 28
- Views: 21889
- Tue Jul 12, 2016 5:26 am
- Forum: Early model JD crawler technical support
- Topic: JD 440 crawler idle lever
- Replies: 3
- Views: 3744
- Fri Jul 08, 2016 6:56 am
- Forum: Show & Tell
- Topic: The Wallenstein Solution
- Replies: 7
- Views: 9245
You might try something like in the link below for loading your round bales. They call it a tightening scissor clamp, but I'm not sure if that's the correct name. I know the jaw size would have to be much wider than what's in the link. I know I've seen them bigger for picking up square bales I think...
- Tue Jun 28, 2016 5:28 am
- Forum: Show & Tell
- Topic: The Wallenstein Solution
- Replies: 7
- Views: 9245
That thing looks cool. So do you get the bucket and post hole digger and bed pan with the log trailer or is that stuff sold separately? My stepdad has the Wallentein 3-point hitch winch and the thing is amazing. He runs it with a small 30HP john deere and it'll pull some very large logs with only ru...
- Wed May 18, 2016 6:41 am
- Forum: Off-topic discussions
- Topic: New yellow project
- Replies: 11
- Views: 11764
Reviving this old thread. I'll post here because there isn't much action on the Moline forum and for some reason I can't get registered on Yesterday's Tractors. Below is a link to the photobucket album instead of posting tons of pictures. This has turned into a pretty big project but will hopefully ...
- Tue Apr 26, 2016 5:45 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 440 parts just in
- Replies: 2
- Views: 3750
- Fri Mar 25, 2016 8:43 am
- Forum: Early model JD crawler technical support
- Topic: Nose mounted hydraulic tank on 440?
- Replies: 3
- Views: 3710
When I was looking for new pumps I think a replacement Cessna was decent price. Lavoy probably knows better though. Just a little heads up. If you're talking about the hydraulic tank for the diesel 440, the fill hole is extremely small, so don't start dumping it in fast or you'll have fluid all over...
- Fri Mar 11, 2016 9:32 pm
- Forum: Early model JD crawler technical support
- Topic: 420 Transmission and torque tube disassembly
- Replies: 4
- Views: 4287
- Mon Feb 22, 2016 6:37 am
- Forum: Off-topic discussions
- Topic: Gasket Sealers/Makers
- Replies: 4
- Views: 5242
- Fri Feb 19, 2016 11:07 am
- Forum: Late model JD crawler technical support
- Topic: 350 carrier bearing
- Replies: 12
- Views: 9350
Never worked on a 350, but I understand what I'm seeing. I don't see why you would have to change the bearing and seal. I don't believe the sealing is done on that sleeve anyway. Your seal is installed on the quill (#4) and then the sealing surface rides on the ring gear and that's where the seal is...
- Fri Feb 19, 2016 7:18 am
- Forum: Early model JD crawler technical support
- Topic: 420 shifting problems
- Replies: 4
- Views: 5349
I don't have a 420, but I believe they are similar to a 440 which I have. If the 1st and 4th shift fork is engaged into either gear, then the other forks will not move. There is an interlock pin to keep it from shifting into two gears at the same time. If you're in first gear then yes I believe the ...
- Thu Feb 18, 2016 5:50 pm
- Forum: Off-topic discussions
- Topic: Gasket Sealers/Makers
- Replies: 4
- Views: 5242
Gasket Sealers/Makers
I'm working on another tractor and it's about time to start reassembly. I was wondering what some of you used to add a little extra seal to gaskets. Any paper gasket, I put a light film of oil and I usually have good luck. Even though the gaskets are new, I feel like it might be worthwhile to add a ...
- Fri Feb 05, 2016 9:59 pm
- Forum: Early model JD crawler technical support
- Topic: ICD specific parts?
- Replies: 17
- Views: 12994
I don't mind my 2-53 to much. It starts right up when it's warm and only needs a small shot of either when it's cold. It does have a decent amount of oil blow by from something which is quite annoying but for the 3 hours a year of runtime I put on it I can deal with it. Lavoy your prices sound prett...
- Sun Jan 31, 2016 2:38 pm
- Forum: Early model JD crawler technical support
- Topic: 430c final drive gears 16/63 & 14/55 question
- Replies: 4
- Views: 5251
- Fri Jan 29, 2016 8:35 pm
- Forum: Show & Tell
- Topic: 1958 JD440 IC For Sale in Northern Ohio
- Replies: 3
- Views: 5691