Search found 301 matches
- Thu Nov 12, 2015 10:00 am
- Forum: Early model JD crawler technical support
- Topic: JD 1010 diesel crawler engine trouble
- Replies: 59
- Views: 44112
does the machine start pretty easily from cold, if it does I would guess the internals are ok....low compression they crank excessively to start. you could always rig up a temporary fuel supply direct into your pump to rule out fuel starving. what will happen if you lift your blade all the way up an...
- Wed Nov 11, 2015 11:30 am
- Forum: Early model JD crawler technical support
- Topic: JD 1010 diesel crawler engine trouble
- Replies: 59
- Views: 44112
- Wed Nov 11, 2015 8:04 am
- Forum: Early model JD crawler technical support
- Topic: JD 1010 diesel crawler engine trouble
- Replies: 59
- Views: 44112
I have to ask if your 4 glow plugs are good, and if you are using them correctly. that diesel requires glowing to start and glowing after it begins to run. if you glow it to start and then let it run without glowing until it clears up it will fart, smoke and sound like it has 3 dead holes...mine wil...
- Mon Nov 09, 2015 8:51 pm
- Forum: Early model JD crawler technical support
- Topic: Roller Lubricant
- Replies: 7
- Views: 6134
- Mon Nov 09, 2015 2:25 pm
- Forum: Late model JD crawler technical support
- Topic: 450 Loader track adjustment
- Replies: 25
- Views: 17945
when the pins and bushings wear to the point of no more adjustment, the chain also doesn't match the pitch of the sproket anymore, this in turn causes rapid wear and you will feel the chain crunching up onto the sprocket because the two parts don't match up anymore as they revolve around. how much d...
- Fri Nov 06, 2015 7:26 pm
- Forum: Early model JD crawler technical support
- Topic: 40C Clutch and paint
- Replies: 11
- Views: 9403
- Fri Nov 06, 2015 7:30 am
- Forum: Early model JD crawler technical support
- Topic: 40C Clutch and paint
- Replies: 11
- Views: 9403
you have gone through the trouble to tear down the machine to get to the clutch, at this point you should replace everything that looks worn or used up. I know the money part stinks, but it stinks alot more to put it all back together with worn parts.....your just pulling finals for nothing. I also ...
- Thu Nov 05, 2015 7:14 am
- Forum: Early model JD crawler technical support
- Topic: 1010 transmission issue
- Replies: 14
- Views: 10366
- Wed Nov 04, 2015 1:35 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 transmission issue
- Replies: 14
- Views: 10366
- Tue Nov 03, 2015 5:43 pm
- Forum: Late model JD crawler technical support
- Topic: New to crawlers, undercarraige questions?
- Replies: 19
- Views: 14183
if you want a crawler to have around and do your projects and improvements go for it and get one if you just need work done it is cheaper to get the work done as needed. owning a crawler is a love/hate type if thing, most of us have our machines because they are fun to use and we get satisfaction ke...
- Mon Nov 02, 2015 2:47 pm
- Forum: Early model JD crawler technical support
- Topic: 420C - Engine Questions
- Replies: 3
- Views: 4002
I would put the proper thermostat in it, running without a thermostat, causes the coolant to circulate full bore all the time, this can actually cause "hot spots" in the engine cooling passages because the coolant is traveling so fast around the system it doesn't pickup any heat and remove to the ra...
- Sat Oct 31, 2015 3:34 pm
- Forum: Late model JD crawler technical support
- Topic: 450c hauling
- Replies: 16
- Views: 16644
- Sat Oct 31, 2015 9:23 am
- Forum: Late model JD crawler technical support
- Topic: 450c hauling
- Replies: 16
- Views: 16644
- Tue Oct 27, 2015 6:47 pm
- Forum: Show & Tell
- Topic: My 1st Crawler - 440
- Replies: 42
- Views: 85471
- Tue Oct 27, 2015 6:42 pm
- Forum: Late model JD crawler technical support
- Topic: 450 track question
- Replies: 2
- Views: 3049