JDcrawlers Messageboard

Measured my tracks to see how worn they were 100% worn 23.57" mine measure 24.25" no wonder they jumping the sprocket my grossers are only11/16 high was going to weld new grouser bar this winter. New rails and pads are ordered.ITR America $2860.00 $150.00 Shipping.

For a 350 T4F3D

wondering if any one on this forum may have a front idler in usable condition for sale

Jim salvatore

586-405-8183

found one from wengers of meyerstowne 400.00 -144.00 ship very good condition did not like shipping price !!!

thanks much

I will check things a bit more.

JIM

I am having problems with the track coming off the sprocket 3 times so far.I am thinking chains are worn beyond use . anyone know of a good place to buy new I am in Michigan.

JIM

I have a set of roller rock guards for sale also a set of sprocket shields

JIM 586-405- 8183

not sure if it as what you need

off a 350 T4F3D

have for sale two sprocket shields and rock guards off 350

jim 5864058183

In need of a used roller for a 350 dozer pt # AT104780 only one, purchased four from AIS in lansing MI @45.00 ea. Have for sale two sprocket shields pt #T20755 also rock guards for rollers if interested make offer on parts.

jim 586 405 8183

Had been having alternator issues on my 350 had a denso when I bought the machine with the wrong size pulley had to put a disconnect switch because it would drain batteries when it was not running . found a new single wire from DB Electrical best part $ 71.00 including shipping with the 5/8 pulley ....

tried out my 350 today doing some clearing lots tighter now that all of the bolts are tight and all are where they should be pictures to follow when I figure out hot to post

that's my guess also hope both shafts are usable could mean even more work

Been using my 1966 350 for clearing over grown brush where I live was working in third gear back blading left over branches put into forward to make another pass a very loud sound like a slipping spline or coupling and no movement of the machine. Reverser I believe is working if I have trans in neut...

another way i use quite frequently is heat red hot with a rose bud torch quench with cold water or let cool over night and have done all that have been mentioned.

jim

I highly recommend detroit radiator there is one in PA very reasonable . best to do a re core i got my 350 dozer done for $355 from them had to drive a bit was worth it local wanted $475

JIM

would like to purchase a set of of sprocket weights if any one has any available for a 350 dozer

JIM