Search found 154 matches
- Sat Sep 24, 2016 12:58 pm
- Forum: Late model JD crawler technical support
- Topic: 350B
- Replies: 4
- Views: 3717
- Sat Sep 24, 2016 10:12 am
- Forum: Late model JD crawler technical support
- Topic: 350 Gas quits every 30 minutes
- Replies: 8
- Views: 6305
Make sure your fuel tank is clean as well. My 350 would die on occasion for seemingly no good reason during the winter and it turned out to be a little ball of ice (could be anything foreign in the tank) that drifts close enough to the pickup and gets sucked over the opening but cannot pass. Engine ...
- Sat Sep 17, 2016 6:19 pm
- Forum: Late model JD crawler technical support
- Topic: Tach gear replacement
- Replies: 8
- Views: 6096
If having a functioning tach is your only concern there are some other options. Check out Tiny Tach online. It is a digital unit that senses fuel pressure pulses in one of your injector lines and creates a tach signal. Around $200.00 and non invasive. There are some other electric diesel tach option...
- Fri Sep 16, 2016 3:35 pm
- Forum: Late model JD crawler technical support
- Topic: 350 weight
- Replies: 7
- Views: 7711
350 weight
JD350B with 6 way dozer and ROPS canopy no rear mounted equipment weighs 10,600 pounds according to JD specs
- Fri Jun 03, 2016 5:47 pm
- Forum: Late model JD crawler technical support
- Topic: 1973 JD350B
- Replies: 22
- Views: 15606
Did you try a John Deere agricultural equipment dealer for the corn head grease? As previously mentioned the construction industrial and agricultural divisions of John Deere often don't have much knowledge of the other divisions product lines. Depending on how many old crawlers are around some const...
- Tue May 24, 2016 11:13 pm
- Forum: Late model JD crawler technical support
- Topic: Diference btwn 450E and 450G?
- Replies: 9
- Views: 8753
- Tue May 24, 2016 11:07 pm
- Forum: Late model JD crawler technical support
- Topic: 9550 Backhoe on 350C loader. Valve sticks.
- Replies: 2
- Views: 3009
I had a cracked valve segment on my 92 series hoe attachment on my 350 loader. No longer available from Deere but readily available from original manufacturer. Can't remember offhand if mine was Commercial or Custom valve company but the hydraulic shop I took it to had no trouble identifying and ord...
- Mon May 16, 2016 9:59 pm
- Forum: Late model JD crawler technical support
- Topic: 350b loader grouser bars
- Replies: 10
- Views: 8096
- Fri May 06, 2016 11:53 pm
- Forum: Late model JD crawler technical support
- Topic: 350b loader grouser bars
- Replies: 10
- Views: 8096
Rather than welding full length strips of grouser material I caulked my loader pads using 3 inch long by 3/4 inch tall pieces of preformed grouser material purpose made for ice lugging on crawlers and it drastically improved my machines ability to get around in slippery conditions. I did every pad a...
- Wed Apr 27, 2016 2:11 pm
- Forum: Late model JD crawler technical support
- Topic: JD350 crawler loader , backhoe low hyd press
- Replies: 27
- Views: 20193
If you go to jdpc.deere.com (John Deere online parts catalogue) and search your model of backhoe it will give you a parts breakdown. The model 92 hoe is actually for JD 300 and 400 industrial tractors but it uses the same mounting arrangement the crawlers do. Model 9250, 9300 and 9550 (and probably ...
- Wed Apr 27, 2016 12:51 am
- Forum: Late model JD crawler technical support
- Topic: JD350 crawler loader , backhoe low hyd press
- Replies: 27
- Views: 20193
- Thu Apr 21, 2016 10:04 pm
- Forum: Late model JD crawler technical support
- Topic: JD350B Reverser problems?
- Replies: 5
- Views: 5912
- Tue Mar 29, 2016 11:14 am
- Forum: Late model JD crawler technical support
- Topic: My 450b steering clutch expierence
- Replies: 7
- Views: 6290
There must be an established ratio of hours used to days fixed that defines happiness or satisfaction or some delusional variation there of. I look at the 350C 6 way dozer with cracked steering clutch housing and asst stripped fasteners and think about how nice it manoeuvres in the bush and the grea...
- Sun Mar 20, 2016 5:26 pm
- Forum: Late model JD crawler technical support
- Topic: 450c pinion seal??
- Replies: 9
- Views: 7857
When I drained my 450C I got approximately equal amounts from the transmission and both clutch housings combined. So be ready for about 10-11 gallons from the transmission 5 or 6 gallons from each clutch housing. My machine had 2 drain plugs on each clutch housing. The upper fwd plug drains a pocket...
- Sun Mar 20, 2016 4:56 pm
- Forum: Late model JD crawler technical support
- Topic: 450c pinion seal??
- Replies: 9
- Views: 7857