JDcrawlers Messageboard

Howard, Thank you. I just wanted to be sure there were no modifications to the tractor when the winch was installed. I have been looking at a tractor for sale locally and was not interested in one with a winch. I would probably pull it and install a PTO. Any idea on the weight of the winch, I think ...

I was wondering how difficult it is to remove a winch from a 420C (not sure of the brand of winch). Once removed, is the factory PTO still on the tractor? Are there any parts missing that would need to be put back on?

Thank you.

Brian

Pat, You might try putting several layers of electrical tape over the nameplate prior to blasting. That is what I did when using plastic media and sand for blasting aircraft parts (If the parts were going to be repaired and the nameplate did not need to be removed). If the part was bad, and we neede...

If anyone is interested... If you have the dimensions of parts that you have fabricated, or design dimensions of parts, and would like to have fabrication drawings for them to share with whoever needs them, I can CAD (Computer aided drawing) them up for you... I have been drafting for the last 10 ye...

Charles,
Could you send me some pictures of the # 61 blade.
StaceyJan@aol.com
Thanks
Brian

sorry Russ,

I was reading the name from the top to the bottom...

Russ

There is a 40C on Ebay with the same cage, can't tell if it has a winch or not...

ebay #: 320041589389

location Whidbey Island, Washington...

Good luck

Brian

I'm looking at buying a 420C that I found locally, it does not have a blade on it.

I would like to know if anyone has a blade for sale, (I would perfer a # 62), or if someone has sold one within the past year and what was the price...

Thank you.

Brian

Lavoy, Thanks for the information. Is this correct then... MC60 is an inside arm with one hydraulic cylinder. The # 61 was an inside arm single cylinder (4 way blade). The # 62 was an inside arm dual cylinders (6 way blade). Visually, how can I tell the 602 blade from the # 61 and # 62? Also, what w...

Lavoy,

Can you list the Deere blades that came with each modle from MC thru 440, and a general discription. It would be great to know what was available.

Thanks.


Brian

Will a # 76 blade fit on a 430C? of so, what else does it fit.

Thanks

Brian

I took another look at the 420C, and checked out the blade, it's a #76.

Lavoy,

Most of the links have been welded or have cracks on the inside radius. What would cause these cracks.

What is your price for a complete set of 14" wide tracks for a 5 roller.

Thanks

Brian

Has anyone built a brush rake for a Deere blade?. If so, please post some pictures, or email me at StaceyJan@aol.com. I would like to see what designs are out there. I'm looking at purchasing a 420C with a #71 (I think) blade, and a rake would come in handy where I live.

Thank you.

Brian

Lavoy
I was talking about an original, with the limit stops...

What is the value (cost) of a 3pt cylinder?

Thanks