Search found 127 matches
- Sat Sep 11, 2021 12:54 pm
- Forum: Late model JD crawler technical support
- Topic: Split link on JD450C undercarriage
- Replies: 4
- Views: 3901
Re: Split link on JD450C undercarriage
I thought the SALT's had the gator-teeth?
- Wed Sep 08, 2021 10:48 am
- Forum: Late model JD crawler technical support
- Topic: BAD Diesel HELP
- Replies: 12
- Views: 7327
Re: BAD Diesel HELP
Happened to me once. After siphoning all I could, I used an electrical fuel pump hooked to a hose with a copper tube extension to get all I could out. Was on a slight incline, so all was shifted to one side which made it easy. Unhooked lines, cleaned filter, pressurized the tank and began reconnecti...
- Sun Jul 18, 2021 4:02 pm
- Forum: Late model JD crawler technical support
- Topic: Fuel Priming
- Replies: 6
- Views: 5007
Re: Fuel Priming
That was exactly the issue! Knowledge is a marvellous thing! I had even called a local Dealer and that must not have occurred to him. I will post the Model next time! After 4 days of aggravation I can't thank you enough! :D Richard These folks are sharp. I have a later model 450G, most posts cover ...
- Sat Jul 03, 2021 5:35 am
- Forum: Off-topic discussions
- Topic: Lincoln Weldanpower G8000 w/Onan 16hp
- Replies: 2
- Views: 11653
- Fri Jul 02, 2021 4:11 pm
- Forum: Off-topic discussions
- Topic: Lincoln Weldanpower G8000 w/Onan 16hp
- Replies: 2
- Views: 11653
Lincoln Weldanpower G8000 w/Onan 16hp
Hoping for the off-chance that someone may have one of these units and can snap a photo of the wiring for the run/start/stop and turtle/rabbit switches. I have a unit that was SMASHED by a huge pine tree that I am repairing. All the rest is repaired, but those switches look like a grenade hit them a...
- Thu Jul 01, 2021 10:42 am
- Forum: Late model JD crawler technical support
- Topic: 400G LONG TRACK
- Replies: 7
- Views: 5609
Re: 400G LONG TRACK
Aren't pictures of the new toy required?
- Sun Jun 20, 2021 3:59 pm
- Forum: Late model JD crawler technical support
- Topic: Possible seized/frozen motor
- Replies: 3
- Views: 3143
Re: Possible seized/frozen motor
Can you pull the starter and get some bar leverage on the flywheel?
- Wed May 19, 2021 6:28 pm
- Forum: Late model JD crawler technical support
- Topic: '73 - 450B Crawler/Loader/Hoe Restoration
- Replies: 260
- Views: 215429
Re: '73 - 450B Crawler/Loader/Hoe Restoration
Al, what exactly do you mean when you talk about relief holes and "BANG" when it jumps the sprocket from snow? Was snow building up inside the link and making your track skip teeth on the sprocket and you drilled holes in the shoes as a clean-out of sorts? How big of a hole did you have them cut, h...
- Tue May 18, 2021 6:25 pm
- Forum: Late model JD crawler technical support
- Topic: '73 - 450B Crawler/Loader/Hoe Restoration
- Replies: 260
- Views: 215429
Re: '73 - 450B Crawler/Loader/Hoe Restoration
[/quote]I don't like the idea of having uneven overhang of pad relative to the center of the chain. [/quote] Oh, I was thinking cut to exact size you were looking for. I couldn't find ANY new shoes for mine with relief holes cut, so I had them plasma cut the trap holes. Works great for me! No more B...
- Tue May 18, 2021 8:06 am
- Forum: Late model JD crawler technical support
- Topic: '73 - 450B Crawler/Loader/Hoe Restoration
- Replies: 260
- Views: 215429
Re: '73 - 450B Crawler/Loader/Hoe Restoration
Can you plasma cut to the size you need?cordlesscarpenter wrote: ↑Tue May 18, 2021 7:03 am
FYI, everyone seems to be 'out of stock" of the narrow single full height dozer pads. Anyone know someone who's got the goods?
- Tue May 18, 2021 8:03 am
- Forum: Late model JD crawler technical support
- Topic: '73 - 450B Crawler/Loader/Hoe Restoration
- Replies: 260
- Views: 215429
Re: '73 - 450B Crawler/Loader/Hoe Restoration
Hey Al, At first I thought Berco was a company but then realized it was a brand of track. "North American Track" carries Berco and I'm working with them on quotes. They were more expensive than AMS but I just emailed them again to see if their SALT chain was outfitted with the master "LINK" vs "PIN...
- Tue May 18, 2021 5:19 am
- Forum: Late model JD crawler technical support
- Topic: '73 - 450B Crawler/Loader/Hoe Restoration
- Replies: 260
- Views: 215429
Re: '73 - 450B Crawler/Loader/Hoe Restoration
Try these folks. They did me well. https://www.tracksnteeth.com/ [/quote] Did you buy SALT for a 450 from them? Do you remember how much they ran? [/quote] I bought my SALT tracks from Berco about 11 years ago. Bought my sprockets from Berco too at the same time, but they were not very "finished", ...
- Mon May 17, 2021 9:05 am
- Forum: Late model JD crawler technical support
- Topic: '73 - 450B Crawler/Loader/Hoe Restoration
- Replies: 260
- Views: 215429
Re: '73 - 450B Crawler/Loader/Hoe Restoration
Try these folks. They did me well.cordlesscarpenter wrote: ↑Mon May 17, 2021 8:56 amDo you or anyone else know of a better, cheaper source for track chain and other undercarriage parts? I'm looking at replacing almost the entire undercarriage on this project
https://www.tracksnteeth.com/
- Fri Mar 26, 2021 9:16 am
- Forum: Late model JD crawler technical support
- Topic: bolt on track cleats
- Replies: 9
- Views: 7360
Re: bolt on track cleats
Boy, they are very 'proud' of those buggers, aren't they?
- Wed Mar 17, 2021 5:14 am
- Forum: Late model JD crawler technical support
- Topic: 400G crawler top rollers
- Replies: 8
- Views: 4396
Re: 400G crawler top rollers
These folks are pretty good, I've used them for undercarriage before. Maybe give them a call and they can help?
https://www.tracksnteeth.com/parts/john ... s%5B%5D=11
https://www.tracksnteeth.com/parts/john ... s%5B%5D=11