Search found 393 matches
- Thu Jan 17, 2008 8:39 pm
- Forum: Late model JD crawler technical support
- Topic: Hard Starting 350, etc.
- Replies: 19
- Views: 18507
That is what a diesel fired heater is ours are made by ESBAR I think it is the smallest coolant heater they make .If you go to your FORD dealer they should have a kit for liquid loop heat system .We have one on each of the two new 6.4 liter trucks for engine heating the drainage plows .Our local sma...
- Thu Jan 17, 2008 7:19 pm
- Forum: Late model JD crawler technical support
- Topic: 450c serial #
- Replies: 2
- Views: 3591
- Thu Jan 17, 2008 7:16 pm
- Forum: Late model JD crawler technical support
- Topic: 550A
- Replies: 8
- Views: 8430
- Thu Jan 17, 2008 6:03 pm
- Forum: Late model JD crawler technical support
- Topic: Hard Starting 350, etc.
- Replies: 19
- Views: 18507
We install a in block on the backhoes on our JCBs ,CAT and the DEEREs in the center frost plug between second and third cylinders .These units are only forty watt but do a more efficient job than 100 watt units plumbed into lower hose or circulation hose units they lose to much heat just getting the...
- Wed Jan 16, 2008 6:36 pm
- Forum: Late model JD crawler technical support
- Topic: What year is it????
- Replies: 2
- Views: 4020
I need at least 5 numbers in a row without a letter in there .And what model is it as that is also important .say I was going to find someone to give the s/n book to.Anybody want to post serial #s from this book Get in touch with me it needs to be done and I have very little time to do it . Digitup.
- Wed Jan 16, 2008 6:20 pm
- Forum: Late model JD crawler technical support
- Topic: Hard Starting 350, etc.
- Replies: 19
- Views: 18507
Some of those little 350s could be a real pain to start I had one and everyone told me no way they are just great I cured mine by taking it to an auction [You didn't want to hear that did you ] but I always figured that 350s were not my machines any way .I bought several since and these little bugge...
- Wed Jan 16, 2008 5:55 pm
- Forum: Late model JD crawler technical support
- Topic: 550A
- Replies: 8
- Views: 8430
I think the problem was that John Deere had out powered that drive system .The early 550s had the same drives and bull gears as a 450E I Think don't take my word for this but It is as close as s#$t to swearing to the ratio and gear width in both any way.I never had problems with finding parts my gea...
- Tue Jan 15, 2008 4:30 pm
- Forum: Late model JD crawler technical support
- Topic: 550A
- Replies: 8
- Views: 8430
Check your trany temp or pressure gage if it fluctuates or pressure goes away then it could be seals or pump in trany .The 550s and 555s were bad for taking the bull gear bearing out usually brought on by torquing into something and turning then letting the leaver slam back the quick snap back into ...
- Sun Jan 13, 2008 8:09 am
- Forum: Late model JD crawler technical support
- Topic: Loading a dead 450 onto a flat bed
- Replies: 2
- Views: 4402
- Sat Jan 12, 2008 4:20 pm
- Forum: Show & Tell
- Topic: oops, there i go again...
- Replies: 4
- Views: 7121
- Thu Jan 10, 2008 9:36 pm
- Forum: Late model JD crawler technical support
- Topic: 350B's last year??
- Replies: 1
- Views: 3330
It looks like this was one of those years that Deere fazed out one model and went into the next mixing serial#s and models as the 350B-started at 29508 in1995 and the 350Cs started in 1995 with serial# 29600 mixed with the former till 1996 starting at -240367 both the 350Bs and the 450Bs mixed at th...
- Mon Jan 07, 2008 9:08 pm
- Forum: Show & Tell
- Topic: 450 colour?
- Replies: 4
- Views: 6461
Deere will paint your dozer or grader or even your excavator green and ag yellow for no extra charge .We have a couple of townships up here that got green graders for years now and they would take a sticker kit for a 7700 combine and cut off a 0and put that decal on the 770 grader some years ago .I ...
- Thu Jan 03, 2008 8:23 pm
- Forum: Off-topic discussions
- Topic: 2 pistons 2cranks 4conecter rods 1 motor
- Replies: 7
- Views: 8229
And a spot to park the bike I doubt it !!She is still upset about a new drainage plow .It has been working so I can throw my hat in the house and she hasn't said any thing till little brother announced the cost to her at Christmas . I nearly got committed then .I won't need a tax wright off for a ye...
- Thu Jan 03, 2008 7:47 pm
- Forum: Early model JD crawler technical support
- Topic: Poll for what kind of crawler you have.
- Replies: 220
- Views: 198152
- Wed Jan 02, 2008 7:28 pm
- Forum: Off-topic discussions
- Topic: 2 pistons 2cranks 4conecter rods 1 motor
- Replies: 7
- Views: 8229
Someone stayed up nights thinking up that design up though .I would like to see how smooth that engine realty runs.I thought you would still have some up and down movement with the piston throw ? Wonder if they would send one over for us to try out .In the spring of course .I am wondering about the ...