Search found 27 matches
- Fri Jul 20, 2018 8:36 am
- Forum: Early model JD crawler technical support
- Topic: Digging deaper into my Gearmatic 8a winch - includes pictures
- Replies: 32
- Views: 26783
Re: Digging deaper into my Gearmatic 8a winch
Paul, I cut a new piece of thick felt that is used under furniture to keep the legs from scratching the floor. Thickness seemed to be perfect, with right amount of contact on the shaft, but not too tight. You can find it at hardware stores. It has an adhesive back and comes in a rectangular shape. I...
- Sat Mar 17, 2018 7:41 am
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8a Winch/Controller Rebuild
- Replies: 24
- Views: 21064
Re: Gearmatic 8a Winch/Controller Rebuild
Sorry, mental vapor lock - you do not need to install the cover to test the brake circuit, just the clutch.
Andrew
Andrew
- Sat Mar 17, 2018 7:37 am
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8a Winch/Controller Rebuild
- Replies: 24
- Views: 21064
Re: Gearmatic 8a Winch/Controller Rebuild
As notmeu noted, take the cover off an get a look at how things are working. It's likely that vibration from having the PTO engaged and the crawler running is helping to self-bleeding the air out of the system into the controller reservoir, at least enough to get things working for a while. If it si...
- Sat Feb 11, 2017 4:32 pm
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8a Winch/Controller Rebuild
- Replies: 24
- Views: 21064
One other item on the controller. If the brass bushing around the handle shaft needs to be replaced, use Loctite 603 on the bushing. The replacement bushing may not be a tight fit if the casting hole is worn. The 603 will seal the bushing to the casting so the fluid does not leak from the reservoir....
- Sat Feb 11, 2017 7:38 am
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8a Winch/Controller Rebuild
- Replies: 24
- Views: 21064
Tom, hooks and chokers are on. Also have been using a skidding cone for larger hitches. Easier than a mid 50s Buick hood. Keeps things a little cleaner. Not much snow here and the ground is still too squishy. Wimpy winter so far. Gregjo, thanks. The sugarhouse is a timberframe. We used hemlock from ...
- Fri Feb 10, 2017 8:05 pm
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8a Winch/Controller Rebuild
- Replies: 24
- Views: 21064
Gearmatic 8a Winch/Controller Rebuild
http://i38.photobucket.com/albums/e133/vtmartins4/IMG_0073_zpsd1tfffnb.jpg Thought I would list some lessons learned on a recent rebuild of an 8A winch and controller. Going to try posting first to test for debug error. As it has been noted many times on the forum, before purchasing a winch, take t...
- Thu Dec 08, 2016 6:14 pm
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8A Winch Closure Plate
- Replies: 2
- Views: 3077
- Sat Dec 03, 2016 4:54 pm
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8A Winch Closure Plate
- Replies: 2
- Views: 3077
Gearmatic 8A Winch Closure Plate
Does anyone have a close-up picture or dimensions for the closure plate located on the clutch/brake side and in front of the cover plate? It is held on by two bolts to the winch mounting flange.
Thanks!
Andrew
Thanks!
Andrew
- Tue Aug 09, 2016 6:45 pm
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8A Winch Bearings
- Replies: 4
- Views: 4340
- Mon Aug 08, 2016 6:14 pm
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8A Winch Bearings
- Replies: 4
- Views: 4340
Gearmatic 8A Winch Bearings
Finally got the winch torn apart without burning the barn down or loosing any fingers - quite a job. Does anyone have a list of replacement bearings? The parts list only identifies the ring and pinion bearings. I need to replace all the bearings on the shaft. Original bearings are too corroded to re...
- Sat May 28, 2016 7:03 am
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8a Winch Clutch Lever Arm
- Replies: 1
- Views: 2423
Gearmatic 8a Winch Clutch Lever Arm
Trying to remove the clutch lever arm which seems to be frozen to the clutch spider. The arm is stuck in a position against the secondary clutch band so that I can't access the second jacking bolt hole to pull the spider and the arm off the drum spline as one unit. I have tried heat on the "collar" ...
- Sat Apr 09, 2016 5:02 am
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8a PTO Gear Needed
- Replies: 1
- Views: 2337
Gearmatic 8a PTO Gear Needed
Hi Folks,
Starting in on a rebuild of a Gearmatic 8a winch. Anyone have a source for a PTO gear - Gearmatic #1254, located in the adaptor plate? This one is missing some teeth, something a tube of Fixodent wont help with.
Thanks.
Andrew
Starting in on a rebuild of a Gearmatic 8a winch. Anyone have a source for a PTO gear - Gearmatic #1254, located in the adaptor plate? This one is missing some teeth, something a tube of Fixodent wont help with.
Thanks.
Andrew