If the shaft on the engine is turning does not mean the pump shaft is turning take pump off and look at the coupling
JIM
Search found 363 matches
- Sat Oct 17, 2015 11:08 am
- Forum: Late model JD crawler technical support
- Topic: 450C Hydraulics Not Working!
- Replies: 7
- Views: 5107
- Mon Jun 08, 2015 11:44 am
- Forum: Late model JD crawler technical support
- Topic: 350 crawler/loader service manual
- Replies: 6
- Views: 6053
350 manual
the number of the manual you need is SM2063
JIM
JIM
- Wed May 27, 2015 1:05 pm
- Forum: Late model JD crawler technical support
- Topic: 350 Track Rollers
- Replies: 16
- Views: 13610
350 rollers
Might want to pull plugs out and check lube in them just a thought
JIM
JIM
- Wed May 20, 2015 12:04 pm
- Forum: Late model JD crawler technical support
- Topic: 450B trans temp.
- Replies: 3
- Views: 3411
Trans temp
I have a 450C replaced the electric with a mechanical no degrees on it but the needle stays in the lower section yours seems hot to me .
JIM
JIM
- Tue Apr 21, 2015 6:11 am
- Forum: Late model JD crawler technical support
- Topic: JD 350 Identification
- Replies: 6
- Views: 7473
- Thu Apr 09, 2015 6:11 am
- Forum: Late model JD crawler technical support
- Topic: Reverser will not 'engage'
- Replies: 11
- Views: 9810
no movement
Possible cause of no movement, there is a splined coupling connecting the reverser to transmission that has a tendency to fail .I had it happen to my 350 dozer awhile back.
JIM
JIM
- Thu Mar 05, 2015 5:26 am
- Forum: Late model JD crawler technical support
- Topic: Paint question
- Replies: 7
- Views: 7303
- Wed Mar 04, 2015 6:01 am
- Forum: Late model JD crawler technical support
- Topic: Torsional Isolator Deere Straight 350
- Replies: 3
- Views: 3712
- Sun Mar 01, 2015 7:29 pm
- Forum: Late model JD crawler technical support
- Topic: Picked up a 9300 today
- Replies: 3
- Views: 4105
- Wed Feb 25, 2015 5:39 pm
- Forum: Late model JD crawler technical support
- Topic: Track Installation Trick
- Replies: 4
- Views: 4953
- Sat Feb 21, 2015 6:05 pm
- Forum: Late model JD crawler technical support
- Topic: Oil Leaks (Straight 350)
- Replies: 2
- Views: 2771
- Mon Feb 09, 2015 5:50 pm
- Forum: Late model JD crawler technical support
- Topic: Reverser dipstick and fill location on straight 350 Loader?
- Replies: 22
- Views: 20840
- Mon Feb 09, 2015 4:44 am
- Forum: Late model JD crawler technical support
- Topic: Reverser dipstick and fill location on straight 350 Loader?
- Replies: 22
- Views: 20840
- Sat Feb 07, 2015 11:43 am
- Forum: Late model JD crawler technical support
- Topic: Reverser dipstick and fill location on straight 350 Loader?
- Replies: 22
- Views: 20840
- Thu Feb 05, 2015 3:50 pm
- Forum: Late model JD crawler technical support
- Topic: Drott 4 in 1 clam cylinder, need to straighten or replace
- Replies: 6
- Views: 5695