Search found 1874 matches

by jtrichard
Wed Mar 11, 2009 12:56 am
Forum: Show & Tell
Topic: My "new to me" 2010
Replies: 18
Views: 17476

sounds like the end cap on the trans cooler froze i had same thing on one of mine both ends froze before i bought it the caps are not avilable from jd and i could not find any wreckers with one i did find one from a privite party and one cap had been welded on it they can be brazed the gaskets are a...
by jtrichard
Tue Mar 10, 2009 10:57 pm
Forum: Show & Tell
Topic: My "new to me" 2010
Replies: 18
Views: 17476

trans cooler

reddirt if you can take a pic of the left side of the water pump if it has a 1/2 in copper tube going down off of it then you have a second trans cooler and the end cap might be leaking as well as the one in the rad. if not that there is only the lower rad.tank cooler just like a pass. car rad. has ...
by jtrichard
Tue Mar 10, 2009 10:43 pm
Forum: Show & Tell
Topic: My "new to me" 2010
Replies: 18
Views: 17476

2010

is the s/n tag still on the loader valve box? if so what is the number and i will see if is close to mine my 2010 is over 42000 i will have to look to see what the exact numbers are
by jtrichard
Tue Mar 10, 2009 10:20 pm
Forum: Show & Tell
Topic: My "new to me" 2010
Replies: 18
Views: 17476

Reddirt one more thing on the piston in the track adjuster there is a grove or line that tells you that there is no more safe adjustment left it looks like that you wont see that for a very long time
by jtrichard
Tue Mar 10, 2009 9:50 pm
Forum: Show & Tell
Topic: My "new to me" 2010
Replies: 18
Views: 17476

2010

your chains are in great shape where is the s/n at on the the engine? look on the bell housing left side for another one it looks like the upper roller is in the center if it is then your s/n should be over 42000 if it is closer to the rear then it is before 42000 if they changed the engine you migh...
by jtrichard
Tue Mar 10, 2009 8:15 pm
Forum: Early model JD crawler technical support
Topic: 2010 steering clutches
Replies: 8
Views: 7301

2010 brake

it can be done but it is a total PAIN you might want to wait
by jtrichard
Mon Feb 09, 2009 8:11 pm
Forum: Show & Tell
Topic: Newbie with a 350
Replies: 2
Views: 4705

350

looks like a pretty tight machine but you might want to look into weld on grouser bars soon
by jtrichard
Sat Jan 24, 2009 10:17 pm
Forum: Early model JD crawler technical support
Topic: Priming system for a 2010
Replies: 31
Views: 25877

Hi guys the fuel gets atomized in the intake there are spray nozzles where the intake meets the head it your 2010 did not have a primer before you will need to get another intake manifold that is setup for the primer and has the parts in it hope this helps
by jtrichard
Thu Jan 22, 2009 10:47 pm
Forum: Early model JD crawler technical support
Topic: Priming system for a 2010
Replies: 31
Views: 25877

I think that kit is just the fitting and hoses as for the other pumps i would not take a chance that they are not positive shut off pumps like the kohler style and with the fuel tank being above the engine if it does not shut off completly it will fill the intake and a cylinder with fuel then if you...
by jtrichard
Wed Jan 21, 2009 7:24 pm
Forum: Early model JD crawler technical support
Topic: Priming system for a 2010
Replies: 31
Views: 25877

yes primers do help with starting if you dont have one you can also set the throttle to full and start that way with the preheaters just make sure you back it down when she fires and preheat till it runs smooth as for using the cheaper pumps other than the oem style (kohler) they dont have the posit...
by jtrichard
Sat Jan 17, 2009 9:12 pm
Forum: Early model JD crawler technical support
Topic: stuck steering clutch 2010
Replies: 3
Views: 4174

stuck steering clutch 2010

anyone had any luck breaking free a stuck clutch i have shimed the pressure plate out trying to get as much pressure off of the discs as i could no luck i was thinking about water and maybe with antifreze as it cuts rust some what
by jtrichard
Tue Jan 13, 2009 12:38 am
Forum: Lavoy's Little Shop O' Deeres
Topic: ripper shanks wanted
Replies: 1
Views: 2674

ripper shanks wanted

looking for ripper shanks for a mod. 36 on a 2010 i hear they are the same as one used on an early JD grader
by jtrichard
Tue Jan 13, 2009 12:04 am
Forum: Early model JD crawler technical support
Topic: cant delete
Replies: 0
Views: 1766

cant delete

i can edit but i cant get it to delete
by jtrichard
Mon Jan 12, 2009 11:50 pm
Forum: Early model JD crawler technical support
Topic: 1010c engine issues
Replies: 7
Views: 7813

a 1010 or 2010 is the same they can be bored .020 over but that is not much if you have piting your up that creek i have a bored liner plate but the pits are still there they might not be as bad as yours i just did not want to take the risk as i use my 2010s a lot yes i said 2010S i now have three 2...