Search found 369 matches
- Sat Feb 18, 2017 7:33 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 crawler parts machine
- Replies: 11
- Views: 11192
- Mon Feb 13, 2017 9:03 pm
- Forum: Early model JD crawler technical support
- Topic: Pictures
- Replies: 1
- Views: 2750
Re: Pictures
by using a website like photo bucket. Look under the Q & A section on the board then look at the posting photos post.
- Mon Feb 13, 2017 8:27 pm
- Forum: Early model JD crawler technical support
- Topic: 420 hyd issue
- Replies: 8
- Views: 7200
Re: 420 hyd issue
Just make sure your pressure is below 1000 psi or you will damage the pump.
- Mon Feb 13, 2017 7:26 pm
- Forum: Early model JD crawler technical support
- Topic: 420 hyd issue
- Replies: 8
- Views: 7200
Re: 420 hyd issue
The specifications for the hydraulic pump is 950 psi and up to 9 or 10 gallons per minute of flow, depending on the throttle position. How are you checking your hydraulic level in the tank? With the blade up or down? If you add hydraulic fluid while having this problem, does it help or do you get fl...
- Sat Feb 11, 2017 5:14 pm
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8a Winch/Controller Rebuild
- Replies: 24
- Views: 22416
The only gasket material that I am aware of that is compatible with brake fluid is teflon and EPDM. There is other materials but I do not think they last as long. It does not look like 603 is compatible, lock tight has a compatibility chart for brake fluid, this is what is compatible All Loctite® An...
- Sat Feb 11, 2017 6:55 am
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8a Winch/Controller Rebuild
- Replies: 24
- Views: 22416
- Fri Feb 10, 2017 9:33 pm
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8a Winch/Controller Rebuild
- Replies: 24
- Views: 22416
Re: Gearmatic 8a Winch/Controller Rebuild
Andrew, congratulations on getting your winch working, it will be a valuable asset for your crawler, as I am sure you already know. Now that you have a winch you will have to build a canopy or some sort of FOPS!!! I am glad that I could help you with with your rebuild, now get some logging chains an...
- Thu Feb 02, 2017 7:24 pm
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8G Winch
- Replies: 3
- Views: 3588
Re: Gearmatic 8G Winch
The fairleads you will probably have to build http://www.jdcrawlers.com/messageboard/viewtopic.php?t=10428&highlight= http://www.jdcrawlers.com/messageboard/viewtopic.php?t=10293&highlight= http://www.jdcrawlers.com/messageboard/viewtopic.php?t=9957&postdays=0&postorder=asc&start=0 Some of the parts...
- Thu Feb 02, 2017 7:09 pm
- Forum: Early model JD crawler technical support
- Topic: Ice
- Replies: 8
- Views: 6859
- Thu Feb 02, 2017 7:07 pm
- Forum: Early model JD crawler technical support
- Topic: Ice
- Replies: 8
- Views: 6859
- Thu Feb 02, 2017 3:25 pm
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8G Winch
- Replies: 3
- Views: 3588
Re: Gearmatic 8G Winch
Have an 8G winch we are working on. Am in need of any manuals or information related to it. Also looking for a few parts: external brake assembly, clutch control lever, and a fairlead. I realize these parts are like finding a needle in a haystack, but if someone could at least provide close-up pict...
- Sun Jan 08, 2017 11:09 am
- Forum: Early model JD crawler technical support
- Topic: rollers
- Replies: 9
- Views: 7481
- Sat Dec 17, 2016 7:15 pm
- Forum: Early model JD crawler technical support
- Topic: re..jd420c
- Replies: 3
- Views: 3626
Re: re..jd420c
The original Jd literature specificitaions for the weight states 4140 - 4700 pounds. But i do not think that includes the blade, then it also depends on which blade was installed and also if it has a winch, etc.
- Wed Dec 07, 2016 3:31 pm
- Forum: Early model JD crawler technical support
- Topic: HYD ?
- Replies: 1
- Views: 2433
Re: 420 loader
Can you post a photo? Hello Ralph!
- Sat Dec 03, 2016 8:44 pm
- Forum: Early model JD crawler technical support
- Topic: Gearmatic 8A Winch Closure Plate
- Replies: 2
- Views: 3122