Search found 43 matches
- Tue Oct 12, 2010 5:15 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Parting out my 440ICD ( offer ended )
- Replies: 6
- Views: 6502
Parting out my 440ICD ( offer ended )
I'm going to part out my tractor or will consider selling it complete. The reason for getting rid of it is that the transmission is bad. It is presently partially tore down from the front to the transmission and the transmission is apart. It is a 1959 model, serial 451xxx. It has a 6 way blade with ...
- Thu Apr 08, 2010 7:59 am
- Forum: Early model JD crawler technical support
- Topic: 1959-60 440ICD
- Replies: 17
- Views: 14553
- Tue Apr 06, 2010 4:47 pm
- Forum: Early model JD crawler technical support
- Topic: 1959-60 440ICD
- Replies: 17
- Views: 14553
- Tue Mar 16, 2010 5:35 pm
- Forum: Early model JD crawler technical support
- Topic: 440 IC brake/ clutch pedals
- Replies: 3
- Views: 4276
- Mon Feb 01, 2010 5:59 pm
- Forum: Early model JD crawler technical support
- Topic: JD 40C will not start
- Replies: 2
- Views: 3389
The first thing I would do is to see if there is spark at the points. Chances are that all it needs is to have the points cleaned up. My 40C will not spark at all if it sets more then a month or so. All I do is run a point file or some emery cloth through them followed by a clean rag. As to the plug...
- Fri Nov 13, 2009 5:36 pm
- Forum: Early model JD crawler technical support
- Topic: Governer on 420c
- Replies: 2
- Views: 3349
- Tue Nov 10, 2009 5:38 pm
- Forum: Early model JD crawler technical support
- Topic: 420C idler bushing and shaft dimensions
- Replies: 8
- Views: 9322
- Mon Nov 09, 2009 5:55 pm
- Forum: Early model JD crawler technical support
- Topic: 420C idler bushing and shaft dimensions
- Replies: 8
- Views: 9322
Brian I don't think there is a bushing in the support. At least I have never seen one. I wonder if somebody didn't turn the shaft and install a bushing in the support. The parts book lists M 2266T as the bushing number for the idler and rollers. I was able to get them from Deere about 8 years ago. M...
- Sat Nov 07, 2009 7:13 pm
- Forum: Early model JD crawler technical support
- Topic: 420C idler bushing and shaft dimensions
- Replies: 8
- Views: 9322
- Sat Oct 17, 2009 4:46 pm
- Forum: Early model JD crawler technical support
- Topic: 440 jd
- Replies: 2
- Views: 3510
- Mon Oct 05, 2009 5:15 pm
- Forum: Early model JD crawler technical support
- Topic: 40C Bent Pushrod
- Replies: 2
- Views: 3047
- Sat Aug 29, 2009 11:31 am
- Forum: Early model JD crawler technical support
- Topic: blcok heater for a 440icd
- Replies: 2
- Views: 3155
- Wed Aug 26, 2009 5:50 pm
- Forum: Early model JD crawler technical support
- Topic: 440ic steering clutch, need help please!!!!
- Replies: 8
- Views: 7286
It's not hard to adjust the fingers but I'm pretty sure you will have to pull the final drive again. I believe there is a special tool but I just measure them with a rule. I set mine at 13/16Th's but this may not be enough on the 440. I thought of another possible problem. Did the hub that the fibre...
- Tue Aug 25, 2009 4:45 pm
- Forum: Early model JD crawler technical support
- Topic: 440ic steering clutch, need help please!!!!
- Replies: 8
- Views: 7286
- Fri Aug 07, 2009 4:36 pm
- Forum: Early model JD crawler technical support
- Topic: Idler Question
- Replies: 3
- Views: 4329