Hi, I am looking for a good used transmission INPUT SHAFT for a JD 450C. I am also looking for a set of brake bands.
I have a brand new 11" Clutch disc and Pressure Plate for a 450C that I would like to sell.
Please let me know if you have anything OR know someone that does.
Search found 55 matches
- Thu Jun 22, 2017 3:07 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Early Model 450C Parts Needed
- Replies: 0
- Views: 2684
- Tue Dec 30, 2014 10:25 pm
- Forum: Late model JD crawler technical support
- Topic: 450C
- Replies: 56
- Views: 47580
Mark, thank you my friend for the help and advice. By the looks of things I am going to hit these issues one at a time not only because this looks like a huge job but it also looks like a bunch of money. I am going to get the main clutch done first and then start on the rear. I am going to try and d...
- Tue Dec 30, 2014 7:50 pm
- Forum: Late model JD crawler technical support
- Topic: 450C
- Replies: 56
- Views: 47580
OK, Now I really need some advice. I am posting a picture of a mirror that shows a weep hole next to the hyd hose and this is where my leak is. I am assuming it is the piston seals like Mark was talking about? My question is does the sprocket assy need to be disassembled and the steering clutch drum...
- Mon Dec 29, 2014 7:35 pm
- Forum: Late model JD crawler technical support
- Topic: 450C
- Replies: 56
- Views: 47580
I am trying to post a few picts and have determined that it is a task to do on this web but will give it a shot and thought I would post some more as I go. This (if works) just shows how full the brake compartment is of fluid and was wondering if anyone thought it would be OK to pressurize the port ...
- Sun Dec 28, 2014 5:15 pm
- Forum: Late model JD crawler technical support
- Topic: 450C
- Replies: 56
- Views: 47580
Well after abit of further inspection I think (like Mark suggested) the trans pump may be weeping a bit of oil that is causing a bit of gunk build up on the clutch. So it appears that if I pull the bell housing off that this would be fairly accessible? Is this a pretty easy fix and would anyone reco...
- Sun Dec 28, 2014 12:36 pm
- Forum: Late model JD crawler technical support
- Topic: 450C
- Replies: 56
- Views: 47580
Thanks Mark, like said though I really don't see a bunch of oil just a bunch of nasty greasy residue. THe disc and flywheel seem coated with a greasy type of material but it for sure could have a small leak that mists to create this gunk. I think I will look into a seal and brg like you said just as...
- Sat Dec 27, 2014 8:36 pm
- Forum: Late model JD crawler technical support
- Topic: 450C
- Replies: 56
- Views: 47580
Hello JD friends. I hope everyone had a great Xmas! Just an update....after a bit of OSB and a few short 2x4's to repair garage door I got the ol 450 in the garage and I just finished pulling the clutch. I must say I was a bit disappointed but I did find a great coating of heated grease/oil and that...
- Mon Dec 15, 2014 4:41 pm
- Forum: Late model JD crawler technical support
- Topic: 450C
- Replies: 56
- Views: 47580
- Mon Dec 15, 2014 12:34 pm
- Forum: Late model JD crawler technical support
- Topic: 450C
- Replies: 56
- Views: 47580
- Mon Dec 15, 2014 7:37 am
- Forum: Late model JD crawler technical support
- Topic: 450C
- Replies: 56
- Views: 47580
- Sat Dec 13, 2014 5:00 pm
- Forum: Late model JD crawler technical support
- Topic: 450C
- Replies: 56
- Views: 47580
Hey Drloch, I greatly appreciate your inquiring! I had a huge setback that is a bit embarrassing but what the heck, I did not get injured to bad :oops: As you know very well I am pulling in the crawler because the clutch is out, and after a bit of work I managed to get it in front of my garage to cl...
- Wed Dec 10, 2014 8:26 pm
- Forum: Late model JD crawler technical support
- Topic: 450C
- Replies: 56
- Views: 47580
- Tue Dec 09, 2014 1:51 pm
- Forum: Late model JD crawler technical support
- Topic: 450C
- Replies: 56
- Views: 47580
Yes sir I can (I hope:) Please keep in mind that most of this is from memory from about 3yrs ago and the rest is from just this week. Back when I was using the unit I remember that the left steering was getting weak and the left lever was feeling like there was nothing there. You know how when you p...
- Mon Dec 08, 2014 7:59 pm
- Forum: Late model JD crawler technical support
- Topic: 450C
- Replies: 56
- Views: 47580
Thank you jtrichard for that link and according to those numbers I am way off again :oops: The SN I have is 450CA-234819T and the link says its a 1975 model :?: Well one thing I have correct for sure is its a 450"C" :lol: So with this tidbit of info are the sumps together and I think I am going to s...
- Mon Dec 08, 2014 1:53 pm
- Forum: Late model JD crawler technical support
- Topic: 450C
- Replies: 56
- Views: 47580
Hey Doc, I hope I was not misleading when I said the machine had not been run for a long time!! I did go out at least 2-3 times a year and start it and warm the engine. I should have said "used" it in a long time. Also I think I mentioned this before but the crawler will move when it is cold so Satu...