Hi,
Nothing goes inside it. A pre cleaner is a curved path for the air to follow which results in larger, heavier, stuff getting stuck in the bowl. That lets the main filter element have a longer service life.
Stan
Search found 2848 matches
- Thu Oct 26, 2023 4:54 am
- Forum: Late model JD crawler technical support
- Topic: 350b pre cleaner
- Replies: 1
- Views: 3343
- Thu Oct 26, 2023 4:49 am
- Forum: Late model JD crawler technical support
- Topic: 450C fluid changes
- Replies: 15
- Views: 17382
Re: 450C fluid changes
Hi,
Ok. There was that change along the way.
My post is correct if one has the older rollers on a C model as does my 350C.
Stan
Ok. There was that change along the way.
My post is correct if one has the older rollers on a C model as does my 350C.
Stan
- Wed Oct 25, 2023 5:07 am
- Forum: Late model JD crawler technical support
- Topic: 450C fluid changes
- Replies: 15
- Views: 17382
Re: 450C fluid changes
Hi,
Well, track and.roller lube is NLA. So Corn Head grease is what you need to use. And get a Low Pressure gun, not a normal one or you won't have any seals left to worry about.
Stan
Well, track and.roller lube is NLA. So Corn Head grease is what you need to use. And get a Low Pressure gun, not a normal one or you won't have any seals left to worry about.
Stan
- Mon Oct 23, 2023 4:45 am
- Forum: Early model JD crawler technical support
- Topic: 1010 fan belt replacement?
- Replies: 4
- Views: 4415
Re: 1010 fan belt replacement?
Hi,
Accu-Link belts work just fine. I have used them on machine tools, such as lathes, were the power transmitted is a lot higher than to run a water pump and a generator. They aren't cheap though.
Stan
Accu-Link belts work just fine. I have used them on machine tools, such as lathes, were the power transmitted is a lot higher than to run a water pump and a generator. They aren't cheap though.
Stan
- Thu May 18, 2023 4:19 am
- Forum: Early model JD crawler technical support
- Topic: Need photo of 1010c transmission drain plug location
- Replies: 18
- Views: 25736
Re: Need photo of 1010c transmission drain plug location
Hi,
The 'fun' with any model is Deere always makes running changes. And, they are usually called out by serial number breaks shown in the Parts Catalog.
I have seen drain plugs with different styles in different locations on many models.
Stan
The 'fun' with any model is Deere always makes running changes. And, they are usually called out by serial number breaks shown in the Parts Catalog.
I have seen drain plugs with different styles in different locations on many models.
Stan
- Mon Apr 03, 2023 4:38 am
- Forum: Early model JD crawler technical support
- Topic: jd420 pics
- Replies: 135
- Views: 533731
Re: jd420 pics
Hi,
If it had a differential, both tracks would still move. Just one would move forward and the other backwards when you moved one manually.
When you steered, with brake only and no steering clutch, one track stops and the other speeds up. Disconcerting. I had a Terratrac like that.
Stan
If it had a differential, both tracks would still move. Just one would move forward and the other backwards when you moved one manually.
When you steered, with brake only and no steering clutch, one track stops and the other speeds up. Disconcerting. I had a Terratrac like that.
Stan
- Mon Feb 27, 2023 6:00 am
- Forum: Early model JD crawler technical support
- Topic: 440 tractor power steering belt
- Replies: 6
- Views: 6856
Re: 440 tractor power steering belt
Hi,
Well, there is the Accu-Link belt scheme. I have used those many times in situations such as this. Harbor Freight carries them, of all places.....
Stan
Well, there is the Accu-Link belt scheme. I have used those many times in situations such as this. Harbor Freight carries them, of all places.....
Stan
- Mon Feb 13, 2023 5:50 am
- Forum: Early model JD crawler technical support
- Topic: jd420 pics
- Replies: 135
- Views: 533731
Re: jd420 pics
Hi,
Dang! Double Post!
Stan
Dang! Double Post!
Stan
- Mon Feb 13, 2023 5:50 am
- Forum: Early model JD crawler technical support
- Topic: jd420 pics
- Replies: 135
- Views: 533731
Re: jd420 pics
Hi, Well, the 420 didn't have a stock reverser. That was an option. Looks like your original owner didn't opt for one. So, you have just the regular center frame. And the long propeller shaft. Unless you have a reverser frame someone gutted and put in the long propeller shaft. That's pretty common, ...
- Mon Feb 06, 2023 5:35 am
- Forum: Early model JD crawler technical support
- Topic: jd420 pics
- Replies: 135
- Views: 533731
Re: jd420 pics
Hi,
Back to the reverser handle, many were built without a reverser.....
Stan
Back to the reverser handle, many were built without a reverser.....
Stan
- Wed Dec 14, 2022 5:50 am
- Forum: Late model JD crawler technical support
- Topic: JD350 Loader Radiator remove/replace
- Replies: 10
- Views: 9342
Re: JD350 Loader Radiator remove/replace
Hi,
Down at the bottom. Remove one on each side and it tilts forward. You can then pull the radiator. Worked that way on my straight 350. I never needed to do a radiator on the 350C (so I hope they didn't change how it works).
Stan
Down at the bottom. Remove one on each side and it tilts forward. You can then pull the radiator. Worked that way on my straight 350. I never needed to do a radiator on the 350C (so I hope they didn't change how it works).
Stan
- Sun Dec 11, 2022 6:03 am
- Forum: Late model JD crawler technical support
- Topic: 450d noise? help!
- Replies: 14
- Views: 10805
Re: 450d noise? help!
Hi,
True. All the crawlers begin assembly at the transmission. Have troubles there, everything else has to come off first.
Stan
True. All the crawlers begin assembly at the transmission. Have troubles there, everything else has to come off first.
Stan
- Thu Dec 08, 2022 5:38 am
- Forum: Late model JD crawler technical support
- Topic: Batteries
- Replies: 7
- Views: 4587
Re: Batteries
Hi, I buy Exide or Gould. The ones at the Deere dealer are made by one or the other, but I can't recall which this morning..... Most auto parts store batteries aren't constructed to take the vibration. Cars and trucks having suspensions. I just buy from Deere. They always have the right group, they ...
- Tue Nov 08, 2022 5:22 am
- Forum: Show & Tell
- Topic: New Shirt
- Replies: 11
- Views: 17458
Re: New Shirt
Hi, We have a shirt printing business. What happens is you get to sell some for a while. Once the copyright owner notices you, you get a very nice Cease and Desist letter. And then you very nicely comply and that is that. If you don't, well then you make the lawyer who sent the letter very happy. Th...
- Tue Oct 04, 2022 4:50 am
- Forum: Off-topic discussions
- Topic: Gold Rush had an old JD pushing snow
- Replies: 2
- Views: 11210
Re: Gold Rush had an old JD pushing snow
Hi,
I saw that as well. I pushed a lot of snow with my 68 350 and outside blade. They make for a great snowplow.
Stan
I saw that as well. I pushed a lot of snow with my 68 350 and outside blade. They make for a great snowplow.
Stan