JDcrawlers Messageboard

I will look at that possability first chance. It does not have any leaks that I saw and their seemed to be faint lines on the crossbar where the caps were attached in the past. I moved it back to the lines and it seems to be good on both sides. Good Idea to check thoose bearings. I haven't changed t...

my 350b drivers side sprocket was hitting the back roller when i bought the crawler. My new tech manual explains that shims in or out will solve the alignment problem however my cross-member is welded to the track frames so I loosened the caps holding the rear crossbar and with a jack all and chain ...

Jason thanks for the invite. I am a retailer so before xmas is not very likely but still possible to make the trip. I measured my track chains yesterday using info I found on the messageboard and not to my surprise I am on my last 20% or less. Enough I think to get me by this winter but will be addi...

Jason that winch arch combo sounds interesting. what does it take to put it on and off when needing the hoe? Not something I would do every day, more like the winch combo in the winter and the hoe in the summer. send me info or a link if you would on them. $? I do not have the pto shaft from the bac...

http://farm7.staticflickr.com/6113/6377627821_da2fc8cf07_z.jpg this is the hoe that came with my 350b. it was easy to remove using the hydraulics as it has a well built bracket on the crawler. It is a case d130 hoe attachment and I removed it to get it home and haven't put it back on yet. I might t...

DAD SHOT AT A PESKY CROW WITH THE KIDS PAINT BALL GUN AND TO OUR SURPRISE THE CROW TOOK ONE HIT TO DO IT IN. SINCE THEN WE HAVE DISCOVERED THAT PAINT BALLS ARE DEADLY TO SMALL ANIMALS. WE LIKE THE ANIMALS IN THE YARD BUT IF THERE IS A PROBLEM, THE PAINT BALL GUN IS OUR ANSWER. SCOTTYB

HAVE THE 8 SETS OF HOLES DRILLED IN THE BUCKET THAT LOOK ORIGINAL. LOOKING FOR USED OR REASONABLY PRICED TEETH. I NEED THEM SHIPPED TO CANADA IF IT IS POSSIBLE. PREFER BOLT ON BUT WHAT DO YOU HAVE? SCOTTYB

i'M SCOTT IN SASKATOON SASKATCHEWAN CANADA AND THE RECENT PROUD OWNER OF A 350B CRAWLER LOADER. I HAVE BEEN READING OVER THE POSTS FROM THE LAST COUPLE OF YEARS AND WHAT A GOOD START THIS HAS BEEN. MY DEERE CAME WITH A CASE BACKHOE THAT SOMEONE DID A NICE JOB OF FABRICATING A BRACKET TO FIT IT ON TH...