JDcrawlers Messageboard

will try

thanks for the replies, I ended up making one myself got steel from contractors steel they burnt holes in main plate I used 1 inch steel removed cutting edge left corners on added extra holes at 4'" spacing main plate is 6" high same as new cutting edge,I have 15 3/4 x 3" bolts from cat my holding t...

Possibly the splined coupling between reserver and differential it happened to me. lots of taking apart .

good luck JIM

I have a good used one from a 350 same part # T21127 if it will get you out of a jam put all new when I had the rad re cored

JIM 586 405 8183
I'm Michigan

a local diesel pump repair shop for injectors, the gasket I would check a local auto part store Auto Value or a Napa auto parts

Good Luck
JIM

yes hook chains on grousers to spin chains out push bucket or blade hard into ground so tracks spin then reset until you are out of trouble

If you have something to anchor to like a large tree I have hooked chains to each track and rotate tracks to walk yourself onto the chains then reverse direction to shoot chains back out and re hook and do it again have had to use this system several times

JIM

that is the reverser level check would be nice if it had some oil before you start it .TSC has a universal tractor oil that will work

JIM

Yes definitely a 350 nice original machine once it is cleaned up should be very useful i have one without steering assist and different injection pump that has many more hours .Mine is a 1966 yours may be a little newer but I do not think it is a 74 your blade is a 6305 and with shift lever on dash ...

6305

Iam with Dr loch stay away I just bought a 450 C dozer for $9000.00 has hydraulic assist steering what a big difference wet clutches.

JIM

try E bay

any one have a rake for sale or know of one looking to purchase

JIM

just went to JD Parts priced out tilt cylinder $20.10 for seal O ring and back up ring I also have straight 350 the blade parts is separate from tractor so you need a blade parts book or on the JD web enter for model 6305 it will bring up blade parts book good luck

JIM

If you Google Martin Fluid Power you can contact them I would check JD Parts web site and price out individual seals and there not real pricy that way
I just did a couple on cylinders on a 302 tractor.