Same difference, 90% of the clutch parts on ebay are them. I would say junk pressure plate all things being equal. I know their pressure plates, thrown a couple new ones in the scrap dumpster.
Lavoy
Search found 10813 matches
- Mon Mar 04, 2024 12:23 am
- Forum: Late model JD crawler technical support
- Topic: John deere 350b only cuts one way
- Replies: 15
- Views: 11952
- Sat Mar 02, 2024 11:36 am
- Forum: Late model JD crawler technical support
- Topic: John deere 350b only cuts one way
- Replies: 15
- Views: 11952
Re: John deere 350b only cuts one way
Did you use Ebay parts? My apologies if you got them from me and I just don't recognize you.
Lavoy
Lavoy
- Sat Mar 02, 2024 11:33 am
- Forum: Early model JD crawler technical support
- Topic: fuel additive
- Replies: 4
- Views: 7426
Re: fuel additive
I would add that modern fuel is no more likely to plug a pump than fuel of 50 years ago. I am also going to assume you are talking about a 350 or later crawler, and a diesel as well. If you are having plugging issues of any sort, it is not a fault of the fuel unless you have contaminated fuel which ...
- Sat Mar 02, 2024 11:31 am
- Forum: Early model JD crawler technical support
- Topic: Hardened Valve Seats
- Replies: 1
- Views: 5241
Re: Hardened Valve Seats
Yes, machine shop would need to do it, it isn't expensive, cheap insurance. Ask them as to doing both intake and exhaust.
Lavoy
Lavoy
- Wed Feb 28, 2024 8:33 am
- Forum: Late model JD crawler technical support
- Topic: Straight 550 transmission
- Replies: 4
- Views: 6963
Re: Straight 550 transmission
Like many other aspects of all crawler, lack of maintenance is what I often see talked about as a reason for failure, specifically not changing the trans filter because it is hard to do. This probably means that the fluid did not get changed much either.
Lavoy
Lavoy
- Mon Feb 26, 2024 8:58 am
- Forum: Late model JD crawler technical support
- Topic: Straight 550 transmission
- Replies: 4
- Views: 6963
Re: Straight 550 transmission
In general, you do not read anything good about the 550 transmissions. I would say you are looking at a tear down, sorry.
Lavoy
Lavoy
- Fri Feb 23, 2024 1:20 pm
- Forum: Late model JD crawler technical support
- Topic: Blade compatibility
- Replies: 2
- Views: 5321
Re: Blade compatibility
I am not sure, but I think it is very unlikely.
Lavoy
Lavoy
- Mon Feb 19, 2024 8:44 am
- Forum: Off-topic discussions
- Topic: pic server DOWN
- Replies: 9
- Views: 13616
Re: pic server DOWN
Thank you for doing that, way above my pay grade.
Lavoy
Lavoy
- Tue Feb 06, 2024 9:27 am
- Forum: Early model JD crawler technical support
- Topic: 440icd info
- Replies: 7
- Views: 6140
Re: 440icd info
Any of the J20 spec lubes is my preference as well, or Hygard direct from Deere.
Lavoy
Lavoy
- Mon Feb 05, 2024 9:11 am
- Forum: Early model JD crawler technical support
- Topic: 440icd info
- Replies: 7
- Views: 6140
Re: 440icd info
Yes, AW32 is what you want. If you are in warmer climes, you can use AW48 as well.
Yes on the GL5, but flush the trans with diesel or kerosene and get as much moisture out as possible first.
Lavoy
Yes on the GL5, but flush the trans with diesel or kerosene and get as much moisture out as possible first.
Lavoy
- Mon Feb 05, 2024 9:10 am
- Forum: Early model JD crawler technical support
- Topic: 440 crawler transmission fluid
- Replies: 1
- Views: 5377
Re: 440 crawler transmission fluid
Any GL5 of your choice will be fine.
Lavoy
Lavoy
- Mon Feb 05, 2024 9:09 am
- Forum: Early model JD crawler technical support
- Topic: Need pictures of back of 1010 crawler loader hydraulic quick connector for backhoe
- Replies: 4
- Views: 12192
Re: Need pictures of back of 1010 crawler loader hydraulic quick connector for backhoe
If no diverter, likely not a hoe crawler, so will be small pump, and the J hooks will probably not have the heavier bracing of a hoe crawler either.
Lavoy
Lavoy
- Thu Feb 01, 2024 9:13 am
- Forum: Early model JD crawler technical support
- Topic: 420C track pad bolts
- Replies: 1
- Views: 5590
Re: 420C track pad bolts
That is what I do, grade 5 or 8 is personal preference, factory were grade 5.
Lavoy
Lavoy
- Thu Feb 01, 2024 9:13 am
- Forum: Early model JD crawler technical support
- Topic: 420C front idler size difference
- Replies: 6
- Views: 6168
Re: 420C front idler size difference
I should have bushings on hand, if not, short delay.
Lavoy
Lavoy
- Sat Jan 27, 2024 9:27 am
- Forum: John Deere crawler FAQ's
- Topic: JD350 thru JD350D Serial Numbers
- Replies: 49
- Views: 239643
Re: JD350 thru JD350D Serial Numbers
I don't think that the parts book support that possibility, but been a while since I researched it. Plus historically, when Deere did changeover between models, production stops while the changes are made to the plant for the new model. There is really no reason to have made a conglomeration crawler...