JDcrawlers Messageboard

Also...non-running....engine blown..worn out?...large lawn ornament

GalenB, Welcome to the board...first thing is...do you have any manuals for it, if not contact Lavoy, owner of this site...he constantly works on these things and sells parts for them. Now, to get into needs....first look thru the top cap and bung cap to visually inspect and see if there is oil, deb...

Hank,

It always helps if you add location to your profile..someone may be nearby if help needed...profile is accessed in the drop down box where you login

Guys, just a heads up with bit of info....serial number 129803....took engine flywheel to my engine shop....had them switch the ring gear as couple teeth degraded.....they actually flipped in over and all teeth on that side are in good shape....seems these are actually made to be flipped....not just...

re...blind bearing removal...someone once told me on like a pilot bearing..to get it out..fill the back space and hole with grease and wood dowel in shaft hole ..hammer and grease pushes bearing out??...have not had to try that yet so cannot verify...kinda use hydraulics to push out..wood dowel shou...

Gus, i found a volunteer seat...came from a Honda Pilot..front passengerseat..has wiring for heated seat if i change over to 12 volt...large seat cushion..imitation leather..adjustable and lean back and folds to front a bit...seems a bit high as yet..used base mount out of old jd40 dozer with flat p...

RE..previous post Anyone got idea on the right steering? This is old, cruddy..dry now...filled the square holes in plugs etc.. stuff that looks like it may have come down from the half moon shaped cover plate...perhaps a bad gasket on cover plate? Cannot see above it as tranny just above...steering ...

Well folks, finally got a chance to look closer at my right final...where i find....grease/oil crud filling both the fill plug and drain plug for the final...just beneath the 2 bolt half moon shaped cover plate.... Now is that coming from my steering or hopefully just the gasket on the half moon cov...

Not sure in the 350s..if same as 420 and 440 series....believe you might be talking about the brake adjustment...rocker arm?...mine does have a woodruff key as well as a capscrew that tightens (pinchers) around the shaft...they do have a tendency to break the casting (pincher) and become loose and t...

Gus, Mite want to include....which model machine ya got!!...If seen my posts I do have a 420 loader and do agree....however my seat arrangement is total scrapped...so am having to start from scratch and build my own...mock up shows must raise above tranny and levers and looks like trial and error ti...

Lavoy,

May as well send both...gotta work on blamed thing.

as well as circlips for 2 master pins

Was looking at seats on my cub cadet and jd mowers....they have flip forward seats...cadet has folding arm rests...they would appear to be a bit "dangerous" due to front end slams down over any slight rise....though possible to clip seat from flipping w/lockdown til needing flip...though will certai...

LAVOY, While my left steering is out...how hard is it to replace the shaft seal?...can i get to it properly to remove and replace it from there or do I need inside the tranny?...I do not see any oil contamination but after getting new clutches in discretion, mite be needed here.. If easy enough to g...

Howdy Jim, Good to hear from you...And YUP ya hit it correctly...My "China" Freight...tap was a DUD...got new one from TSC and cleaned up.. Hopefully Lavoy will have the rest that I need to get started on assembling, worst part is not knowing if blamed engine gonna be fine and run and hydraulic syst...

Well dagnabit...i am having trouble finding out what my engine throwout carrier return spring looks like so i can get one....machine did NOT have even a small bit of that anywhere in center housing... also what gives with chasing my head bolt threads....these son of guns really testing me....got 2 o...