Search found 256 matches
- Sun Aug 08, 2010 7:46 am
- Forum: Early model JD crawler technical support
- Topic: 420C Steering lever stuck
- Replies: 10
- Views: 9065
57pilot, Firts welcome aboard! If there is no movement at all in the steering lever I would conclude that the linkage is rusted together. Very likely the clutch is rusted also as it all shares the same compartment. Take the small rectangular cover(4"x5" approx) off the top of the clutch housing and ...
- Tue Jul 27, 2010 6:23 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 420 solid state ignition?
- Replies: 32
- Views: 23626
- Sun Jul 18, 2010 6:11 pm
- Forum: Show & Tell
- Topic: Adventures in rebuilding the 1956 420-C .
- Replies: 60
- Views: 73855
Dan, We deal with lye and potassium hydroxide in the production of biodeisel. Both NAOH and KOH are nasty chemicals. Get it in your eyes and it will eat your cornias off, inhale the dust or fumes and you burn your lungs. Don't be afraid of it, just respect it - wear proper goggles and a good mask. r...
- Sat Jul 17, 2010 12:20 pm
- Forum: Show & Tell
- Topic: Adventures in rebuilding the 1956 420-C .
- Replies: 60
- Views: 73855
- Wed Jul 14, 2010 11:14 am
- Forum: Off-topic discussions
- Topic: ROYER TOPSOIL SHREDDER---ROCKFORD PTO
- Replies: 13
- Views: 13493
- Tue Jul 06, 2010 1:03 pm
- Forum: Late model JD crawler technical support
- Topic: Reverser pistion disassembly
- Replies: 2
- Views: 3208
Shawn, I 2nd what Tigerhaze said. Have your pictures stored on your computer in a file you can find, go to photobucket.com and sign up -free and easy, once signed in hit the download button and follow the window to the pictures you want. below or to thew right of the picture will be a list of 4 code...
- Mon Jul 05, 2010 5:23 pm
- Forum: Early model JD crawler technical support
- Topic: Electrical
- Replies: 4
- Views: 4981
digger sr, This is what my diagram ended up looking like http://i949.photobucket.com/albums/ad336/celsesser/DSC00881.jpg it shows my mistake of taking the hot to the fuse from the neg side of the ammeter, switched it to the pos side and let there be power... P.S. that is the view of the back side of...
- Sun Jul 04, 2010 7:21 pm
- Forum: Early model JD crawler technical support
- Topic: Electrical
- Replies: 4
- Views: 4981
digger sr, Go to www.ytmag.com and search for "Recommendations for 12 volt conversions" by Genesee Products. That is what I used when I Gutted and rewired mine. The only problem I had was that I initially had the hot lead to the ignition switch on the wrong side of the ammeter(which doesn't work). O...
- Sat Jun 26, 2010 7:59 am
- Forum: Off-topic discussions
- Topic: Tool definitions
- Replies: 10
- Views: 10659
Tool definitions
Ran across this definition of tools that seems to be 100% accurate. Thought I would pass it along. Chuck DRILL PRESS: A tall upright machine useful for suddenly snatching flat metal bar stock out of your hands so that it smacks you in the chest and flings your beer across the room, denting the fresh...
- Wed Jun 23, 2010 7:45 pm
- Forum: Early model JD crawler technical support
- Topic: 1960 440 ICD
- Replies: 31
- Views: 26230
KRAKR, Just watching a couple of your youtube vids. Looks like a nice crawler. In case no one has told you using the reverser like you are doing as a clutch is a BIG no-no. Get the clutch fixed before you total the reverser. You are only supposed to move the reverser handle with the engine clutch re...
- Mon May 31, 2010 3:06 pm
- Forum: Early model JD crawler technical support
- Topic: 1960 440 ICD
- Replies: 31
- Views: 26230
Kraker, The fuel supply and return lines go to the injector. It is a mechanical injector that runs off the middle rocker arm and is controlled by the fuel rack. When installing injector, do not tighte n injector clamp nut to more than 20-25 ft-lb torque as this may distort the injector an d cause wo...
- Mon May 31, 2010 9:52 am
- Forum: Early model JD crawler technical support
- Topic: 1960 440 ICD
- Replies: 31
- Views: 26230
- Sat May 29, 2010 8:42 pm
- Forum: Early model JD crawler technical support
- Topic: 1010
- Replies: 1
- Views: 2545
- Thu May 27, 2010 7:11 pm
- Forum: Early model JD crawler technical support
- Topic: 1010
- Replies: 17
- Views: 13035
Zippy, The reason 1010's and 2010's engine parts(and other parts) are more expensive is that they were transition models and were made only a short time. On the engine it is not 4 separate sleaves but 4 sleaves attached to a "sleave deck" or plate that is only produced( or probably just NOS) by Moth...
- Tue May 18, 2010 7:54 pm
- Forum: Early model JD crawler technical support
- Topic: need help on jd 1010 dozer
- Replies: 7
- Views: 19011