Search found 10795 matches

by Lavoy
Wed Oct 18, 2023 8:11 am
Forum: Off-topic discussions
Topic: Devcon for sprocket/final drive shaft repair
Replies: 3
Views: 9723

Re: Devcon for sprocket/final drive shaft repair

I'm assuming you mean between the hub and the axle? If so, I'm also assuming you have a 3 roller crawler?
Lavoy
by Lavoy
Tue Oct 17, 2023 7:29 am
Forum: Early model JD crawler technical support
Topic: Need pictures of back of 1010 crawler loader hydraulic quick connector for backhoe
Replies: 4
Views: 6656

Re: Need pictures of back of 1010 crawler loader hydraulic quick connector for backhoe

If it is a hoe capable crawler, there will be 2 large lines coming from the diverter near the valve body. If it is not a factory hoe crawler, there will be no lines or diverter.
Lavoy
by Lavoy
Sun Oct 15, 2023 7:59 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: Roller Grease
Replies: 2
Views: 3457

Re: Roller Grease

Whichever is lighter I would guess. I just always use corn head grease.
lavoy
by Lavoy
Sun Oct 08, 2023 5:04 pm
Forum: Show & Tell
Topic: 40C Project
Replies: 12
Views: 19224

Re: 40C Project

I've been out of the office a lot due to a death in the family, but have 14 hours of road time every week, so just leave a message, and I will call on the way back home.
Lavoy
by Lavoy
Fri Oct 06, 2023 3:53 pm
Forum: Show & Tell
Topic: 40C Project
Replies: 12
Views: 19224

Re: 40C Project

You may not know it, I am the owner of this site, and I sell parts for these crawlers. You can call 701-361-1006 and I can get you squared away.
Lavoy
by Lavoy
Thu Oct 05, 2023 5:33 pm
Forum: Late model JD crawler technical support
Topic: identify my 350 injection pump
Replies: 8
Views: 5396

Re: identify my 350 injection pump

Part number should be on the pump.
None of them come with the window, it is only installed for timing, then removed.
Lavoy
by Lavoy
Thu Oct 05, 2023 8:23 am
Forum: Show & Tell
Topic: 40C Project
Replies: 12
Views: 19224

Re: 40C Project

Congrats, enjoy it.
Lavoy
by Lavoy
Thu Oct 05, 2023 8:22 am
Forum: Early model JD crawler technical support
Topic: John Deere mc with log grapple
Replies: 1
Views: 2194

Re: John Deere mc with log grapple

No, jobber or home made.
Lavoy
by Lavoy
Tue Sep 19, 2023 9:29 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: final drive housing
Replies: 1
Views: 7021

Re: final drive housing

Should have one on hand.
Lavoy
by Lavoy
Fri Sep 08, 2023 7:30 am
Forum: Early model JD crawler technical support
Topic: 420C Rubber Tracks?
Replies: 12
Views: 14961

Re: 420C Rubber Tracks?

Can't find it, but it is 74 at the end instead of 72.
Lavoy
by Lavoy
Wed Sep 06, 2023 9:11 pm
Forum: Late model JD crawler technical support
Topic: JD 350C Brake bands
Replies: 2
Views: 3602

Re: JD 350C Brake bands

Very highly unlikely that someone can reline the wet brake bands, but it's possible. Usually you don't see many rebuilds on the wet clutch crawlers, so if yours are worn, you may have other underlying issues.
Price you are seeing on bands, and the freight seem high to me.
Lavoy
by Lavoy
Wed Sep 06, 2023 9:09 pm
Forum: Early model JD crawler technical support
Topic: JD 420c Crawler Hydraulic System
Replies: 8
Views: 9585

Re: JD 420c Crawler Hydraulic System

I would GUESS that your setup would be at 1500PSI which if I am correct would explain the lack of power. Flow is another factor, you may be down on flow and pressure both.
Lavoy
by Lavoy
Wed Sep 06, 2023 9:08 pm
Forum: Early model JD crawler technical support
Topic: 420C Rubber Tracks?
Replies: 12
Views: 14961

Re: 420C Rubber Tracks?

There is a set that will work on the 440, figure about $4000 for the conversion.
Lavoy
by Lavoy
Tue Sep 05, 2023 7:56 am
Forum: Early model JD crawler technical support
Topic: JD 420c Crawler Hydraulic System
Replies: 8
Views: 9585

Re: JD 420c Crawler Hydraulic System

Probably not enough info to give a real accurate answer, would need more info on factory or jobber hoe. But the short answer is if it is already at correct operating pressure, increasing it will just break things. If capacity is not enough, then you need a larger hoe, not more pressure.
Lavoy
by Lavoy
Tue Aug 29, 2023 7:53 pm
Forum: Early model JD crawler technical support
Topic: 1010C Radiator
Replies: 3
Views: 4696

Re: 1010C Radiator

Crawler radiator is unique to the crawler unfortunately.
Lavoy