Search found 83 matches
- Wed May 23, 2012 7:16 pm
- Forum: Early model JD crawler technical support
- Topic: greasing the buttons on the rollers
- Replies: 23
- Views: 20486
greasing the buttons on the rollers
my deere dealer cant supply me with the correct grease gun tip to grease the buttons on this machine - anyone have a part # thanks and they just take reg chassis grease ?
- Wed May 23, 2012 7:14 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 gas carb part
- Replies: 3
- Views: 3972
1010 gas carb part
i was putting a kit in the old girl and there was a i believe a main jet that i pulled out and it had a crack in the brass base - i will look again at the diagram but it was in the centre of the carb body and was recessed and when removed i could see a small crack in it - it runs but im sure i will ...
- Wed May 23, 2012 7:08 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 parts for SALE
- Replies: 7
- Views: 6423
old 1010 parts
i believe i could use the 2 operator steering levers - i am located a ways away but lets see what you want for them and go from there . you will be sending to NY . thanks for the oportunity these levers are easy to remove . please make sure they are in nice condition - not all welded up
- Wed Nov 03, 2010 7:16 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 hydraulic tracktesioner assembly
- Replies: 2
- Views: 3133
1010 hydraulic tracktesioner assembly
the cylinder that slips in the assembly-cast body has heavy pitting and a ripped seal has a lip hanging out from the cast portion needs attention . i have seen chrome portions on other sleeves - am i correct and can some one point me to who can provide the nec part. thanks again . As you have read i...
- Wed Nov 03, 2010 6:45 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 undercarriage rails for a blade with the arms outside
- Replies: 6
- Views: 5592
1010 track frames
the blade upright supports have been welded to the sides of the track frames and thought they were an assembley , i now see that the frames and uprights are bolted . what are track frames worth and do anyone have some clean ones . thanks
- Wed Nov 03, 2010 7:05 am
- Forum: Early model JD crawler technical support
- Topic: 1010 undercarriage rails for a blade with the arms outside
- Replies: 6
- Views: 5592
1010 track frames
Yes Mr Lavoy they are the track frames , for an outside push blade . I could use both sides to make a clean machine very nice . Rollers are good and idlers all ok just the frames getting a tad old . Can anyone help. Thanks
- Tue Nov 02, 2010 7:40 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 undercarriage rails for a blade with the arms outside
- Replies: 6
- Views: 5592
1010 undercarriage rails for a blade with the arms outside
The rails on this 1010 are not excellent and it looks as though you need the whole outside arm and rail . there is some heavy pit in mine and where the front guide is you can see a definate wear on the rail . What are good sides woth aprox and I believe Mr LavoyBrother was a possible and some others...
- Fri Oct 22, 2010 6:46 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: jd 1010 diesel with 93 series A backhoe - parting out
- Replies: 0
- Views: 2198
jd 1010 diesel with 93 series A backhoe - parting out
The diesel did run and is a clean usable piece but should be gone over serial 46133 , complete engine is open to offers 1000. t he backhoe is tight and cylinders very clean , the unit is a 93 series A i suspect it should be worth 1500 but unsure . I can be contacted by email kellytheaker@hotmail.com...