Search found 18 matches
- Wed Feb 18, 2015 3:44 pm
- Forum: Early model JD crawler technical support
- Topic: Side frame removal?
- Replies: 11
- Views: 11152
Thanks to all for the advice. I have every part out of the inside of the FD housings, with just the bowl shaped housings still attached to the sides of the rear end. I have the rear cover off, and have tried tapping from the inside, but so far no movement. It's doped up pretty good with what looks l...
- Tue Feb 17, 2015 10:10 pm
- Forum: Early model JD crawler technical support
- Topic: Side frame removal?
- Replies: 11
- Views: 11152
Side frame removal?
Machine is a 420C. Trying to remove the bearing quills behind the steering clutches. Need seals replaced for sure, and possibly bearings also. Quills are stuck tight - looks like I'll have to remove the side frames so the inner clutch/ final drive housings can be removed. Will I have to remove the 6...
- Thu Feb 05, 2015 10:46 pm
- Forum: Early model JD crawler technical support
- Topic: 420C worth fixing?
- Replies: 1
- Views: 2383
420C worth fixing?
I have a 420C in pieces in my shop. I'm trying to determine if it's worth fixing. About 20 years ago, I broke the FD pinion shaft on the right side (long stupid story). It has been stored inside for the duration, waiting it's turn. When I took it apart recently, I discovered that a previous owner ha...