JDcrawlers Messageboard

I also have a set of chains / rails from my 420 that I do not need. They do need to be rebushed and pinned. Also they still have the pads on them and they are the snow pads. I could take them off if you are only interested in the chains. I am near Buffalo NY

Any thoughts on these/offers ? I would hate to scrap them but they are starting to get in the way.

Today on the Buffalo NY craiglist(farm + garden) there is an engine for sale that the ad said came from a JD 40 combine that was running when removed. It also said it would fit a 1010 or 2010 tractor. HA 115 engine I think. I just thought I would relay this is someone is looking. Let me know if you ...

I have trackpads for sale. They are the two bolt snow pad with half of them with the center notch in the grouser and the other half with the ends notched. Pads are decent. They are still bolted to the rails if you wanted those also. However, the rails need pins and bushings and a couple are the 4 bo...

I know this sounds funny but I am looking for sprockets to fit my 420C but worn out is OK. They are for a project I am working on for the crawler. Also I would like to keep the cost down. As long as the basic round part is Ok they will be good by me. I also hate to tear up a good set as they are har...

I have a complete set of 4 roller rock guard in pretty decent shape. Need some attention but not bent or beat. Part #'s are AM3371T,Am3372T. All 4 pieces available. Also have the 4 roller front idlers part #'s AM2645T. These are for the 31 count tracks. They are both real nice but could use new bush...

I would like to sell a set of 4 roller rock guards to anyone that could use them. They are in decent shape and I can send pictures upon request. I am not going to use them because my 4 roller track frames are tweaked and patched and cracked. I am however looking for a 5 roller setup if anyone has a ...

This is the day we brought it home. It is now in pieces. Have overhauled the engine,tranny and reverser. Now on to the tracks and finals.

Check out pertronix ignitions. I put their kit in one of my 420's and it is the cats meow. Have your delco distibutor # handy to check fitment.

Eric, I have a matched pair that I was going to list in the near future. They are used but in exceptional shape. Let me know what you think. Thanks Eric

That JD # crosses to a CR seal #13649. Hope that helps.

Today as I was cleaning and inventoring all the parts to begin re-assembly I found 2 cracks in the bottom of the brake band/ steering clutch housing. JD part number AM3520T. I think the cracks are fixable but this is becoming a restoration and I think if someone has 1 for sale it may be just as econ...

Looking for an inboard mount blade for my 420C 4 roller. I have what appears to be an after market blade for sale or trade also for the 420 if someone is interested. One side bracket is broken but repairable. I do not want to scrap it yet. I can email pictures if you give me an email address. Eric

I found an oldtimer at a spring shop here that would take the time to make the triangular shaped u-bolts that attach my 62 blade to my 420C. If those fit other setups and anyone needs help getting them let me know and we can send them to you. I will be happy to help as a round u-bolt just does not s...

Ok last ? for now. Do you guys use the exhaust manifold adapter and muffler or the muffler with the flange welded to it?