Search found 212 matches
- Tue Apr 24, 2012 6:56 am
- Forum: Late model JD crawler technical support
- Topic: 350 staight in garage for preventive maintenance
- Replies: 36
- Views: 35402
Hi ! here is the latest , mesured everything steel disk are brand new ( so size is good ) . fiber disk where slightly used but seems that all in all together within spec , the whole assembly was a tad bit to thin, so on the last steel disk I added another old one ( not pitted or rusted) , and put ba...
- Mon Apr 23, 2012 7:05 am
- Forum: Show & Tell
- Topic: 440ICD Rebuild (Nearing completion) Part III
- Replies: 10
- Views: 10692
- Mon Apr 23, 2012 6:44 am
- Forum: Early model JD crawler technical support
- Topic: Tired 1010 crawler-loader
- Replies: 7
- Views: 8173
- Thu Apr 19, 2012 9:00 pm
- Forum: Late model JD crawler technical support
- Topic: 350 staight in garage for preventive maintenance
- Replies: 36
- Views: 35402
Hi ! Need to remove left final drive again , seems that the clutch is not releasing properly and I have no power on the left side at all !!! sh.... I putted the dozer in front of a dirt pile put it in 1st gear half way throttle and release the clutch pedal and it only spin form the right track !! so...
- Thu Apr 19, 2012 7:36 am
- Forum: Late model JD crawler technical support
- Topic: 350B steering clutch R&R
- Replies: 14
- Views: 11971
I meant the seat that you sit on and the whole assembly, fuel tank, battery box etc. I've talked to Lavoy and he said that it isn't necessary. That's good because I'd then have to also remove the ROPS. seat need to be removed to get to the top cover of the clutch assembly ! ( sorry for the bad unde...
- Thu Apr 19, 2012 7:28 am
- Forum: Late model JD crawler technical support
- Topic: 350 staight in garage for preventive maintenance
- Replies: 36
- Views: 35402
Hi ! For the serial # I still pretty astonished about the ending with a T I haven't found anywhere documentaion about the letters at the end . thank you for the praise , and yes I do pray about the adjustment to finaly work . but this is exactly what I have on the tag ! http://i15.photobucket.com/al...
- Wed Apr 18, 2012 11:19 am
- Forum: Late model JD crawler technical support
- Topic: 350 staight in garage for preventive maintenance
- Replies: 36
- Views: 35402
HI ! belly protection pan is back on. The dozer is out the garage but it is not steering properly at all !! I suspect a bad steering clutch adjustement , was too late last evening so it will have to be another day . I find it very hard and akward to adjust those cluchtes & brake we see nothing in th...
- Wed Apr 18, 2012 9:34 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Wanted
- Replies: 11
- Views: 10918
- Wed Apr 18, 2012 8:37 am
- Forum: Show & Tell
- Topic: It's coming together part IV, the details
- Replies: 44
- Views: 38542
- Wed Apr 18, 2012 8:01 am
- Forum: Late model JD crawler technical support
- Topic: 350B steering clutch R&R
- Replies: 14
- Views: 11971
About the parts source question: Lavoy! I'm in Quebec city, Canada and even with the shipping added he has better prices than anyone else on most of things. A lot of parts on these old machines come from aftermarket brand. Some are good some are cheap. Lavoy's stuff is very good quality. I'm pretty...
- Wed Apr 18, 2012 8:00 am
- Forum: Late model JD crawler technical support
- Topic: 350B steering clutch R&R
- Replies: 14
- Views: 11971
Next question, does the seat assembly have to come off to replace the steering clutch? The book makes it look like it does but Andre's post doesn't. can you elaborate about the seat I'm not sure I understand properly what as to come off ! if it is the bearing seat than no if it still good leave it ...
- Tue Apr 17, 2012 7:37 am
- Forum: Show & Tell
- Topic: Finally getting moving in the shop again.
- Replies: 14
- Views: 13620
- Tue Apr 17, 2012 7:36 am
- Forum: Show & Tell
- Topic: update for my new project
- Replies: 1
- Views: 3430
- Tue Apr 17, 2012 7:34 am
- Forum: Late model JD crawler technical support
- Topic: 350 staight in garage for preventive maintenance
- Replies: 36
- Views: 35402
Hello ! Here I go again , Update the shifter knob as well as blocking third & fourth gear ( so my friend can't do any race with it ( he's a machine destroyer ) . removed cleaned & re-assemble the oil-level window. was I happy to throw out the sloted screw !!! lol change my hydaulic oil reservoir fil...
- Mon Apr 16, 2012 12:26 pm
- Forum: Late model JD crawler technical support
- Topic: 350C Reverser Rebuild
- Replies: 33
- Views: 38447