JDcrawlers Messageboard

Fluid and filters on the way!

I'll see if I can snap one later this week.

Did ya notice the lack of inner rock gaurd? I crawled under there and immediately noticed that.

List of used parts im casually looking for:
- muffler (Part # AT19157)
- vented fuel cap
- inner rock guard

Diesel!? No wonder it wont run now haha. I fixed the wording in my previous post. I took a closer look and no vent line. It wouldnt surprise me if the po replaced it with the wrong one. There are all kinds of rigged repairs on this thing. Also I havent figured out if they are wet or dry clutches yet...

I ended up purchasing some manuals from the link I posted. The duplicate in French is annoying to deal with but other then that, so far so good. Tech, parts and operators. The manual specified the type of loader brace to use during service or to use (2) 24" pieces of 4"x4" steel angle. I had some la...

Finally started working on the crawler today. Trammed it from the barn to the house and found I really need to tighten the cab up. It rattles at an unbearable decibel level. Anyway I checked that tag by the battery. Made in Germany 450AA 102694L John Deere Werks Mannheim Good thing I started going t...

Thanks, I hope to get that tag number later this week. Work has been crazy and I havent been able to get to the barn for a few days. I also contacted that farm manual website to see about the publication number. Update: They said its TM4241 TM4242 John Deere site says tech manual is: TM4241 TM4242_I...

Filters and orings showed up this evening. Just need to get fluids and a manual then I can complete the service.

Have any of you dealt with this group before for manuals? Thinking about getting this one:
https://farmmanualsfast.com/products/jo ... ice-manual

Interesting. This machine seems fairly optioned out/loaded. It has a backhoe thats on a slide, cab with heat + windshield wiper and looks like it had a 4 in 1 bucket.

Lavoy wrote: ↑

Fri Sep 18, 2020 12:38 pm

Holes in the boom are likely for the ejector bucket option.
Lavoy

Could you elaborate a bit more on this? I haven't heard of it before.

Great spot! I'll check it out when I run out to the farm over the weekend.

I already ordered the hydraulic filter. Part# AT45422. We'll see if that fits.

I'd like to talk a little bit about the loader as well. Looks like something bad happened at some point based on all of this plate patch work. http://jdcrawlers.lcent.com:8000/johndeere/albums/userpics/10047/Loader_arm_repair.jpg I also wonder if this loader had the Drott 4-1 bucket at some point. S...

Also can someone confirm what the holes in the boom are for? I assume its for a brace to be used when not operational but wasn't sure. http://jdcrawlers.lcent.com:8000/johndeere/albums/userpics/10047/Boom.jpg http://jdcrawlers.lcent.com:8000/johndeere/albums/userpics/10047/Boom_2.jpg Planning to wel...

Very helpful information! Yes it has the spin on filter in front of the radiator. I already ordered a replacement filter for that. http://jdcrawlers.lcent.com:8000/johndeere/albums/userpics/10047/Transmission_Filter.jpg I also ordered new hydraulic filters. It looks washable but I rather be safe sin...

Thanks for putting the pics up Jim! I should mention the gauge cluster is pulled out to repair some mouse damage. Eventually Ill clean up the engine wiring as well. Dash Tag: Made in France Type E7450 Serial 02364CD Saran-Orleans Engine Tag: (Hard to read, may not be correct) Made in France 190L-07 ...

Good idea on checking the threads/size. Also thanks for the brand recommendations, thats the info i was looking for!