JDcrawlers Messageboard

Looking for a 12-14 inch trenching bucket and a ripper tooth for the 9250 backhoe mounted on my JD 350. Not much luck finding a Woods dealer for Gannon buckets in British Columbia and Brandt Tractor doesn't seem interested. Any used buckets in decent condition floating around out there or suggestion...

So I finally made it back to my machine and the trans oil level is barely touching the dipstick and the oil level in one steering clutch housing is high while the other side is normal which seems to suggest that oil might be transferring from transmission to steering clutch housing. Where to go from...

The 9250 hoe on my JD350 had a cracked outrigger valve segment that would leak down internally at a fairly rapid rate. If cylinders are not leaking down and new o-rings in valve segment are ineffective this may be your culprit.

Had my 1980 450C out the other day and just as I was approaching my parking spot it very smoothly coasted to a stop. the engine was still running, it is like it declutched and stopped. No bad or unusual noises. No leaks. No combination of gear and range selection made any difference. Visible linkage...