JDcrawlers Messageboard

I have The Same Problem , Any News On A Fix ???

Jeff

"The damn thing had terminals that were crap. One of them started spinning when I tightened it"


That Coil Is NO GOOD NOW......... Theres A Small Wire On The Back Side Of That Stud, And If It "Spun" Then That Wire Broke And The Coil Is Shot.....

Jeff

No Longer Avaliable From Deere But You Can Get The .020 Over Rings ????? The Standard Sleeve Decks 525.00 And 93.00 ?? For Each Standard Piston.. Any Other Ideas???? Also How Do You Do A Compression Test On The 1010 Diesel Engine ??? What Tools Are Required???

Thansk
Jeff

Yes, There Different....... 10001-42000 Is A Two Piece Line.... Cyl #1 Part # at13730t #2 at13729t #3 at13732t #4 at13731t Then You Need 4 # t11291t 42001 - up Is One Piece.. #1 at17170t #2 at17171t #3 at17172t #4 at17173t.....

Jeff

I Know What Its For .............


It's To Keep The Gas From Dripping On The Manifold And Distribitor And Causing A Fire......... Some People Try To Fill The Gas Tank With A Running Or Hot Engine....... The Shield Allows The Gas To Run Off In A Different Area.......

Thats My 2 cents.......

Jeff

I Think Lavoys On The Light Side...... That Flywheel Weight's 150 LBS Alone...... I Think 500+ ......

Jeff

Does It Start Hard ???????? Sounds Like Your Pump Timing Is Off Or Not Getting Enough Fuel, Have You Changed The Filters ???? If The Engine Runs O.K. ... You May Have Your Tracks To Tight......

Jeff

I'll Check Tonight , I Have A Parts Blower In The Shop, I'll See What I Robbed From It........ Let Me Know What Parts You Need.....

Jeff

Yup, Time For A New Head......... They Crack, And You Can Get A New one For 300.00 ...... I Have 3 Of Them In The Corner That I Have Replaced....... They Make Good Door Stops........

Jeff

Take The Gas Inlet Elbow Off The Carb. There's A Metal Screen On The Other End And I'll Bet Its Pluged Up With Junk...... Happened To Me On My 1010......

Jeff

Yup, I Would Say The Blower Bearing Failed.... And The Rotors Are Hitting....... Just My Guess........

Jeff

Sure Looks Funny........ Got To Be Home Made....

http://cgi.ebay.com/1958-JOHN-DEERE-420 ... dZViewItem

Jeff

Fan Is Right... They Blow Forward....

Jeff

Take The Elbow Off The Carb. Where The Fuel Comes In... Theres A Screen On The End Of It... Its Plugged Up.... I Did The Same Thing, When You Run Them Dry All The Fine Dirt Ends Up In That Elbow.......

Jeff

JP I Have 2 - 1010 Crawlers I See Your From My Area... I'am In Chesaning.... Pins And Bushing = Call AIS In Lansing Or Bridgeport They'll Redo Your Tracks.... Cant Help You On The Reverser Clutchs... Email Me Anytime..

Jeff
neu-rich@centurytel.net