JDcrawlers Messageboard

thanks Lavoy and Happy Fathers day - great job as usual !

thanks for the reply

is the carb on your gas part out the same as my 1010 ? if so i could use a few internals of the carb or whole carb if will work . how much ?

thanks i will contact them

thanks for the reply - it looks like i need an old shebler carb . anyone

i need the nozzle and your saying you dont stock and cant get one thanks

are the hydrolic pumps the same for the 1010 non angle blade as the hydrolic angle blades - the pumps are the same out put ? and the lines are all that is nec to change up or was the pump a higher output ?

HAVE YOU STILL GOT THIS STUFF? kellytheaker@hotmail.com

i am after good track parts like the rails and springs - i need nice stuff , i do have a manual blade and could use an adjustable one . kellytheaker@hotmail.com

the atatchment points on the dozer are included with this setup ? the 1010 that i have just has a push manual blade and i am showing some interest in the set- up and just asking is there anything missing that i require to install on the frame

yes i believe your right with the nozzle , i took it out from the inside of the carb and i could see that there was a small crack in it , in the brass tube portion close to the base , i could see that there was an oportunity to access on the carb exterior , but i used a socket to pull this out

thanks for the replies . lavoy can you help me with that main jet on the carb as well - its the one in the centre of the carb and it is recessed - it is a long brass tube that is cracked and it goes down into the float area .

you have got an email from me and lets go from there , if you can find some pics of the unit it would be helpfull . thanks kellytheaker@hotmail.com

i will mail you - thanks

thanks i will keep as a secondary - would like to use deere if possible thanks . could use a part # for the deere part and waht kind of grease just normal chassis grease thanks again