JDcrawlers Messageboard

Makes the snow look really nice now that it's 80 degrees here. They did a really great job.

I have an mc that if the switch isn't just in the right spot it won't fire

I am interested in one of the 267 gauges What form of payment do you accept.
Thanks Howard

There was a couple on fleebay

If you get up this way and can't use the shaft then give me a heads up and will return your money for the shaft if it is still good.
Howard

If you notice he says he didn't norice any welds on it and the blade has been all redone wiith all kinds of welds and braces plus the original cylinders have been replaced I'm a little nervous about this one becauyse I think it is the same guy I bought another tractor from a few years ago that was b...

It should work as long as you have all the mounting pieces aand the control for the blade.

send me some pictures pcsaw@aol.com

doesn't look to bad except the tract is ajusted out about all the way if the rails are still good you can see if Lavoy has any pins and bushings left

before you pull it apart check your throw out bearing ajustment and make sure that it didn't slip on you. take the little cover off and watch if it is hitting the pressure plate after you pull the lever about an inch and a half if not ajust it. also make sure your brake isn't to tight but probaly no...

I would be interested in one for the 2 cylinder.

Looks good

PLEASE PLEASE PLEASE if you are board member of one of the shows anywhere seperate the dishes and other non tractor or implement parts from each other. I just came back from the Florida Flywheelers and walked for miles and some rows where 90% non parts items. I can't walk very good anymore and there...

I'm wondering if they had a lot of those dashes with the touch pilot holes or if they just put those dashes on the ones that actually had the touch pilot on them

tool carriers are out there but to find one in repairable condition is hard to find