found a kit for my 350 dozer online it is a censna pump find out your maker and contact them
JIM
Search found 363 matches
- Fri May 07, 2021 5:15 am
- Forum: Late model JD crawler technical support
- Topic: 450c Hydraulic pump replacement
- Replies: 3
- Views: 2781
- Sun Apr 18, 2021 10:12 am
- Forum: Late model JD crawler technical support
- Topic: 450c track adjuster replacement
- Replies: 5
- Views: 3732
Re: 450c track adjuster replacement
yes you should tbe able to get out of the spring cup
- Sun Apr 18, 2021 7:04 am
- Forum: Late model JD crawler technical support
- Topic: 450c track adjuster replacement
- Replies: 5
- Views: 3732
Re: 450c track adjuster replacement
you should be able to leave track on use come alongs to pull track forward and if you have an engine lift pick track up some should be able to remove yoke
- Sun Apr 18, 2021 3:49 am
- Forum: Late model JD crawler technical support
- Topic: 450c track adjuster replacement
- Replies: 5
- Views: 3732
Re: 450c track adjuster replacement
put a block of wood by the sprocket go in reverse with the grease fitting and bleed valve out should give enough slack to remove jim
- Mon Apr 05, 2021 3:34 am
- Forum: Late model JD crawler technical support
- Topic: JD450 boom decay
- Replies: 3
- Views: 2898
Re: JD450 boom decay
sounds like your packing on your cylinbers are wasted need to take lift cylinders off and rebuild JIM
- Wed Mar 31, 2021 4:29 am
- Forum: Late model JD crawler technical support
- Topic: Straight 350 filters
- Replies: 2
- Views: 2516
Re: Straight 350 filters
I have found that theJD filters are cheaper than those that you stated also certified heavy truck mechanic now retired !! Jim
- Thu Feb 18, 2021 8:27 am
- Forum: Late model JD crawler technical support
- Topic: 350 Injector Removal
- Replies: 5
- Views: 3886
Re: 350 Injector Removal
there is a small slide hammer that I bought to remove pencil injectors because the first set I took of my 66 350 I ended up destroying the injectors using pry bars believe I purchased on Amazon OTC also makes one much easier
JIM
JIM
- Sun Jan 31, 2021 4:55 am
- Forum: Late model JD crawler technical support
- Topic: What year is my 350
- Replies: 5
- Views: 3943
Re: What year is my 350
have one same series mine is a 66
- Thu Jan 14, 2021 5:07 am
- Forum: Late model JD crawler technical support
- Topic: 1965 straight JD crawler help
- Replies: 14
- Views: 8473
Re: 1965 straight JD crawler help
I have the same series dozer check all of your fluids as no fluid no movement JIM
- Wed Jan 13, 2021 4:39 pm
- Forum: Late model JD crawler technical support
- Topic: 1972 450B
- Replies: 6
- Views: 4452
Re: 1972 450B
first check all your fluid levels if no oil no move !!!!!
JIM
JIM
- Wed Nov 25, 2020 4:01 am
- Forum: Late model JD crawler technical support
- Topic: 450c blade repair
- Replies: 7
- Views: 4944
Re: 450c blade repair
had same problem on same dozer I turned plates over so you have a new surface and welded
3/16 steel on blade also made up some shims made it a lot tighter JIM
3/16 steel on blade also made up some shims made it a lot tighter JIM
- Thu Nov 05, 2020 12:18 pm
- Forum: Late model JD crawler technical support
- Topic: 4000 Winch Weldco-Beales MFG Arch
- Replies: 4
- Views: 3227
Re: 4000 Winch Weldco-Beales MFG Arch
heating them red hot then letting cool on there own heat is a lot better than any penetrating oil have used on frozen parts in the past with good results
JIM
JIM
- Sun Oct 18, 2020 6:55 pm
- Forum: Late model JD crawler technical support
- Topic: JD 450 tune up (Euro Market)
- Replies: 61
- Views: 39879
Re: JD 450 tune up (Euro Market)
might need to do a compression test if you need to start with starting fluid just had 3 cyl Deere would not start with starter fluid checked low compression turned out to be pited exhaust valves
- Tue Oct 06, 2020 5:01 am
- Forum: Late model JD crawler technical support
- Topic: Trans-reverser joiner-stud snap :( how the F...
- Replies: 8
- Views: 5029
Re: Trans-reverser joiner-stud snap :( how the F...
if you do take it apart make sure to put new splined coupling in
- Mon Oct 05, 2020 3:17 am
- Forum: Late model JD crawler technical support
- Topic: Trans-reverser joiner-stud snap :( how the F...
- Replies: 8
- Views: 5029
Re: Trans-reverser joiner-stud snap :( how the F...
had same situation was able to remove with Milwaukee angle drill and a lot of patients
jim
jim