JDcrawlers Messageboard

I have a 450 straight with collar shift transmission I need parts for it that I can not locate. I found a good complete 450B trans and rear complete that has had a fresh rebuild. Would it be a direct replacement into a straight 450 machine? I know how much work is involved but this machine is useles...

Thanks B.Town

Yes they are the same, the model breaks down as a collar shift and the service manual calls it a constant mesh.

Lavoy, do you have a input shaft seal,reverse gear and shift collar for constant mess transmission?
Thanks
Randy

Does anyone have a reverse gear (AT14897) and shift collar (T17532) for a straight 450 crawler? New or a good used one.
Thanks
Randy

Guys, thanks for your input. I have ordered the correct service manual and will report what I find the culprit to be when I get it fixed. I have looked the internal linkages over good and everything seems to be working with no slack, just not enough movement to properly engage. Just one more of the ...

Thanks for the info, you might be right about the serial number. The data plate is damaged and that is what I read it as, but very well could be wrong. I was in the forestry service and I thought they might have ordered it with collar shift instead of H-L-R trans. I will get on JD site and look at t...

I have a 1170 parts catalog and a TM-1033 service manual. Both show the H-L-R transmission only. Also all my web searches show that too. Serial number is 0766431.

I have bought a 450B, model# T5F3C which is a collar shift transmission. It is not shifting the collar all the way over the reverse gear. I can not find a parts or service manual for this trans, just HLR diagrams. Any help?

440 ICD with fresh engine. Less than 5 hours (liners, pistons, rings, mains, rods bearings, injectors, and gaskets.. Final drive rebuilt. Log arch and winch. 63 blade. Twin hyd. valves. Full set of owners, service, parts for crawler and separate Detroit manuals. I have pics per request. Located in S...

I am selling my 440 ICD with log arch and winch. Runs good, good tracks #63 blade. I have pics but can't get them to post here so email me and I will send the pic's to you. $5200.00

I have a log arch and winch on my 440 ICD that I am taking off and will sell if anyone is interested. I am located in north east Alabama.
Email is randyrenfro@netzero.com 256-738-3963

I had the same problem with my 420 rubber tire and it was a brass screen filter in the fitting going into the carb. Plenty of fuel at the carb, but very little going into the float bowl.
Randy

Check these two beauties out.
Randy

http://www.youtube.com/watch?v=2ruJ921A_10&NR=1

Thanks anyway.
Randy