JDcrawlers Messageboard

And all was going to be so good after Obamaclaus was in,,,go figure. Please let me know.
Randy

Lavoy, I sent a couple of emails, did you get those? It was about sending the seat part you had in stock and when the other part will be available.
Thanks
Randy

If only I were closer and had 20K, I could use that ribbon.
Randy

JDM, I have found the same thing true as in your last post about the different parts of the country having a different effect on the same type equipment. I ran sevearl truck shops all over the USA and the same trucks with same spec's had different life exptancies on the same parts. The dust conditio...

I got the injectors back Firday and installed them Sat. Engine is running good for a fifty years old detroit diesel. Now comes the but, when I got this machine in a box, I was told the final drivwe was off to replace the throw-out bearing and tube, which had been done already. So I went about puttin...

Also be sure which way the ground is, + or - to the frame. If it is backwards, the starter runs backwards and the bendix will not go forward, but centrifical force will pull it rearward toward the windings instead toward the ring gear.
Randy

I like that tilt cylinder. I have been contemplating if that would work or not, so now I know it will. I am going to cobble one out for my blade. There is already a double valve assy on the machine.
Randy

Free food and beer

Hi Keith, welcome to the group.
Randy

How much and how do I pay you?
Thanks
Randy

Lavoy,
I sent you a follow-up email about the seat base I need, did you get it?
Randy

Bret,
I saw a lathe on GovDeals.com this week cheap. You might want to check that csite out if you haven't already, it is where gov agencies sell there surplus and this lathe was from a trade school.
Randy

Bret, You are in head of me,,,,I don't know enough to add anything but a little Hugh Moore occasionally. I like the yellow board too, even though I don't own one anymore. There like here, there is a wealth of learning waiting to be picked from the tree of knowledge. I hope it doesn't do me in like i...

[Well, in this case I think the damage was caused by the former owner running the previous tracks so tight the bearing got hammered. I'm currently running a worn set of 350 tracks that everyone says won;t work. Well they will if everything has enough wear. Stuff like that drives poor Lavoy over at ...

Lavoy,
I sent you a message asking how much and how to pay (paypal, credit card, ect) Please let me know.
Thanks
Randy