Search found 71 matches
- Sat May 13, 2023 8:11 pm
- Forum: Early model JD crawler technical support
- Topic: Need photo of 1010c transmission drain plug location
- Replies: 18
- Views: 25716
Re: Need photo of 1010c transmission drain plug location
newwood I have a 1010 so I went and took a look and see the drain plug just where Lavoy described. When I got home I took a look in the pars manual and it shows 2 drain plugs. One on the left and after serial# 48383 the case was changed and the plug is on the right side. So if your serial # is highe...
- Wed May 03, 2023 8:27 am
- Forum: Late model JD crawler technical support
- Topic: 350B Loader Control Valve Leaking
- Replies: 11
- Views: 4276
Re: 350B Loader Control Valve Leaking
If there is room an internal pipe wrench will work.
- Sun Apr 16, 2023 9:21 am
- Forum: Off-topic discussions
- Topic: pic server DOWN
- Replies: 9
- Views: 13299
Re: pic server DOWN
Picture server is still down. Sure hope it is fixed and not lost.
Lots of good pictures and info there.
Steve.
Lots of good pictures and info there.
Steve.
- Mon Apr 03, 2023 12:16 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 diesel will not throtle up and dies
- Replies: 1
- Views: 4335
Re: 1010 diesel will not throtle up and dies
It may be the dampener ring in the injection pump failing. Remove the fitting on the pump for the return line there is a small clear check valve ball in the fitting. If it is plugged with small black chunks the dampener ring is failing. Search on this site for “mouse turds” Your problem could still ...
- Fri Mar 17, 2023 9:51 pm
- Forum: Early model JD crawler technical support
- Topic: 440 engine oil leaks after rebuild
- Replies: 20
- Views: 14532
Re: 440 engine oil leaks after rebuild
smitty906 JimB and JAJ gave you some good advice above. Make sure the pan is straight and the bolt holes have been flattened. The pan bolts are 5/16 x 3/4”. Some of the holes are blind holes and are just a little deeper than the bolt length. Check that the bolts go all the way in with the pan off. T...
- Wed Feb 15, 2023 11:29 am
- Forum: Late model JD crawler technical support
- Topic: 450d slips
- Replies: 6
- Views: 2367
Re: 450d slips
Cut open the old filter and see what’s in there.
- Wed Jan 25, 2023 3:09 pm
- Forum: Late model JD crawler technical support
- Topic: 450d noise? help!
- Replies: 14
- Views: 10794
Re: 450d noise? help!
Look at the first post under Lavoy’s little shop O’Deeres.
- Tue Jan 24, 2023 12:36 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 831 bucket tooth.
- Replies: 9
- Views: 12106
Re: 831 bucket tooth.
Thanks Jim That is what the JD parts man suggested also. He also took me in the back and showed me all the teeth options that they stock. I did some looking online and see some that are similar in design. So lots of options. The 440IC 831 has a big hole in the side of the block so it will be awhile ...
- Mon Jan 23, 2023 10:16 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 831 bucket tooth.
- Replies: 9
- Views: 12106
Re: 831 bucket tooth.
Well I stopped by the JD dealer today and they say not available. Darn I had high hopes. I have a few pieces of old cutting edge, I think l will try welding a piece on. If any of you come across a used tooth let me know.
Steve.
Steve.
- Mon Jan 16, 2023 4:34 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 831 bucket tooth.
- Replies: 9
- Views: 12106
Re: 831 bucket tooth.
Problem solved. I was looking up U 10779 instead of U10779. I will order the tooth from the Pape dealer.
Thanks again Jim.
Thanks again Jim.
- Mon Jan 16, 2023 4:25 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 831 bucket tooth.
- Replies: 9
- Views: 12106
Re: 831 bucket tooth.
Thanks Jim I had checked online with the nearest RDO farm dealer and the next nearest Pape construction dealer. And didn’t find it.
I will call the Pape dealer on the phone.
Steve
I will call the Pape dealer on the phone.
Steve
- Sun Jan 15, 2023 10:09 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 831 bucket tooth.
- Replies: 9
- Views: 12106
831 bucket tooth.
I am looking for 1 bucket tooth for a 440ICD 831 loader bucket.
Thanks.
Thanks.
- Sun Jan 15, 2023 2:33 pm
- Forum: Late model JD crawler technical support
- Topic: Need help out in the woods, lol !
- Replies: 4
- Views: 1765
Re: Need help out in the woods, lol !
I had the wrong info to start with on a reverser. Got it fixed about the same time you posted.
- Sun Jan 15, 2023 1:58 pm
- Forum: Late model JD crawler technical support
- Topic: Need help out in the woods, lol !
- Replies: 4
- Views: 1765
Re: Need help out in the woods, lol !
13 gallons. For the hydraulics 8 gallons for the transmission
- Mon Jan 02, 2023 12:42 pm
- Forum: Late model JD crawler technical support
- Topic: Need help with part number please ?
- Replies: 4
- Views: 1788
Re: Need help with part number please ?
Most good hardware stores will have a ball bearing assortment like this.